Going to sell my rare 2 door .. any ideas on what its worth?
#1
CF Veteran
Thread Starter
Join Date: Jan 2010
Location: St Augustine Florida
Posts: 1,087
Likes: 0
Received 1 Like
on
1 Post
Year: 1992
Model: Cherokee
Engine: 4.0
![Default](https://www.cherokeeforum.com/images/icons/icon1.gif)
so... even tho the jeep itself has 2XX,XXX miles on the body.. its had many upgrades..
Rubicon super flex 4.5 lift
real nice front bumper..
newer engine with bearings replaced 50K miles ago when i put engine in..
new wheel bearings up front..
new u joints
2 door 4x4
Ice cold A/C
5 speed
power windows & locks..
overhead compass ,,, not working tho.
fixing to install new ball joints & tie rod ends..
and there are a few small rust spots I will weld in new metal and have painter friend blend in.
is 4,000 + un reasonable ?
Thanks
Greg
Jeep is in profile..
Rubicon super flex 4.5 lift
real nice front bumper..
newer engine with bearings replaced 50K miles ago when i put engine in..
new wheel bearings up front..
new u joints
2 door 4x4
Ice cold A/C
5 speed
power windows & locks..
overhead compass ,,, not working tho.
fixing to install new ball joints & tie rod ends..
and there are a few small rust spots I will weld in new metal and have painter friend blend in.
is 4,000 + un reasonable ?
Thanks
Greg
Jeep is in profile..
#2
Senior Member
Join Date: Feb 2014
Location: Southgate, Michigan
Posts: 793
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1997
Model: Cherokee
Engine: 4.6 I6
![Default](https://www.cherokeeforum.com/images/icons/icon1.gif)
so... even tho the jeep itself has 2XX,XXX miles on the body.. its had many upgrades..
Rubicon super flex 4.5 lift
real nice front bumper..
newer engine with bearings replaced 50K miles ago when i put engine in..
new wheel bearings up front..
new u joints
2 door 4x4
Ice cold A/C
5 speed
power windows & locks..
overhead compass ,,, not working tho.
fixing to install new ball joints & tie rod ends..
and there are a few small rust spots I will weld in new metal and have painter friend blend in.
is 4,000 + un reasonable ?
Thanks
Greg
Jeep is in profile..
Rubicon super flex 4.5 lift
real nice front bumper..
newer engine with bearings replaced 50K miles ago when i put engine in..
new wheel bearings up front..
new u joints
2 door 4x4
Ice cold A/C
5 speed
power windows & locks..
overhead compass ,,, not working tho.
fixing to install new ball joints & tie rod ends..
and there are a few small rust spots I will weld in new metal and have painter friend blend in.
is 4,000 + un reasonable ?
Thanks
Greg
Jeep is in profile..
Trending Topics
#9
Senior Member
Join Date: Dec 2012
Location: Midwest
Posts: 638
Likes: 0
Received 14 Likes
on
14 Posts
Year: 1998
Model: Cherokee (XJ)
Engine: 4.0L
![Default](https://www.cherokeeforum.com/images/icons/icon1.gif)
The diesels are certainly more rare than any other jeep, at least here in the states.
unfortunately a lot of people willing to spend 4K on a Cherokee want a clean jeep, with low miles, and minimal upgrades.(so they can pick and choose what they want.)
If the body is mint and the interior is complete and clean then you may find a buyer, but here in the Chicago-land you'd be lucky to get 2500 for pretty much ANY Cherokee with over 150K
and as a side note I wouldn't necessarily call new u joints, bearings, ball joints, tie rods, even engine bearings, an upgrade as much as I would consider it maintained and repaired. Most Cherokees with that mileage will need those parts sooner than later, if not already replaced.
unfortunately a lot of people willing to spend 4K on a Cherokee want a clean jeep, with low miles, and minimal upgrades.(so they can pick and choose what they want.)
If the body is mint and the interior is complete and clean then you may find a buyer, but here in the Chicago-land you'd be lucky to get 2500 for pretty much ANY Cherokee with over 150K
and as a side note I wouldn't necessarily call new u joints, bearings, ball joints, tie rods, even engine bearings, an upgrade as much as I would consider it maintained and repaired. Most Cherokees with that mileage will need those parts sooner than later, if not already replaced.
Last edited by XJRed96; 08-16-2016 at 07:25 AM.
#10
CF Veteran
![Default](https://www.cherokeeforum.com/images/icons/icon1.gif)
Yea I've been told my 2 door laredo (power everything) with the aw4 is quite rare but most 2 doors that i've seen are standards.
#13
CF Veteran
![Default](https://www.cherokeeforum.com/images/icons/icon1.gif)
Originally from Jersey myself, DE now but I understand what you mean. I wish mine was mostly manual, ripping the carpet out and bedlining makes the wires more of a hassle. Plus race seats mount to manual brackets which are different.
#14
CF Veteran
Join Date: Jan 2012
Location: Ocean County, NJ
Posts: 2,208
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L
![Default](https://www.cherokeeforum.com/images/icons/icon1.gif)
Yessir. I prefer my jeeps to have manual everything (except trans, love my AW4). Makes life easier and IMO, more of a Jeep. Don't get me wrong, power windows are a wonderful thing but it adds to the nostalgia when you grab that handle and crank that window.