I am getting bushwackers for a 4 door
#1
Thread Starter
Banned
Joined: Oct 2009
Posts: 186
Likes: 1
Year: 1999
Model: Cherokee
Engine: 4.0L I6 MPI 242ci
I am getting bushwackers for a 4 door
ok, so i might be getting a set of bushwackers for a 4 door but I have a 2 door xj. would they fit just fine?
80 bucks but it has a dent on one of the front flares.
is that a good deal?
80 bucks but it has a dent on one of the front flares.
is that a good deal?
#3
CF Veteran
Joined: Nov 2008
Posts: 7,874
Likes: 98
From: Northern Ontario, Canada
Year: 1990, 1999, 2000
Model: Cherokee
Engine: 4.0
they should fit, but the rear will have the split from the two pieces.
as for the dent, heat it up slowly and push out the dent. a heat gun would be ideal, but you can try a hair dryer, and if you must, use a torch, but be smart with it so you don't melt the flare.
or you can sell/trade them for what you need.
as for the dent, heat it up slowly and push out the dent. a heat gun would be ideal, but you can try a hair dryer, and if you must, use a torch, but be smart with it so you don't melt the flare.
or you can sell/trade them for what you need.
#6
Junior Member
Joined: Dec 2011
Posts: 99
Likes: 0
From: Westchester NY
Year: 2000
Model: Cherokee
Engine: 4.0L
It's a great deal, but I dont think they will fit. Buy them though and sell them, make a few bucks.
Thread
Thread Starter
Forum
Replies
Last Post
ZJBeachRunnerGC
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
18
03-10-2021 06:52 PM
cmcl3m0r3
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
05-21-2019 03:38 PM
Sivadon
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
1
09-24-2015 08:31 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)