New "you know you drive an xj when"
#3466
CF Veteran
Join Date: Jan 2009
Location: Aurora
Posts: 3,513
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997 XJ
Model: Cherokee
Engine: 4.0 HO JASPER MOTOR
Originally Posted by dukie564
yea that's a lot of money to spend on a 44....
Could've built a 60 but that requires major modification to the Unibody and such. I also couldn't pass up the deal i found on the axle $100 with inner yukons. Plus I work at 4wp so parts were easier and cheaper to get
#3467
Originally Posted by XJSETH
Not really. For the way I wheel way worth it. I've jumped my jeep a few times and its held up. All my parts are worth every dollar.
Could've built a 60 but that requires major modification to the Unibody and such. I also couldn't pass up the deal i found on the axle $100 with inner yukons. Plus I work at 4wp so parts were easier and cheaper to get
#3469
CF Veteran
Join Date: May 2010
Location: Fort Collins, CO
Posts: 3,405
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1996
Engine: 4.0L HO
When today is as good a day as it gets to go to the junkyard. 60 degrees and 40mph wind, with snowmelt that will turn the place into a mud pit. Still better than going in the cold!
#3470
Originally Posted by mrfajita
When today is as good a day as it gets to go to the junkyard. 60 degrees and 40mph wind, with snowmelt that will turn the place into a mud pit. Still better than going in the cold!
#3471
☠ CF Sheriff ☠
YKYDAXJ when you look out the window at work and see it's finally snowing for the first time and get excited that snow wheeling is in the near future (hopefully)
#3476
Seasoned Member
Join Date: Jun 2011
Location: Wichita
Posts: 419
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1987
Model: Cherokee
Engine: 4.0
When installing 2in coil spring spacers turns into a 12hr job from multiple trips to auto parts store cuz everything you disconnect breaks
#3477
Member
Join Date: Jun 2011
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0 Straight Six
Originally Posted by Jeepyjeepy
When installing 2in coil spring spacers turns into a 12hr job from multiple trips to auto parts store cuz everything you disconnect breaks
#3479
CF Veteran
Join Date: Dec 2010
Location: Frederick, Maryland
Posts: 6,880
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 I-6 High output
Ykydaxjw you prep for an o2 sensor by purchasing 2 cans of pb blaster and a large can of anti-seize. Hopefully all goes well!