CatBassin

It is hard to ride out a DW while laughing.

1plunk

Lol I can only imagine...

98 brutus

hey you think that works? I also am wondering if that's why my wheel bearing have been going so fast because when I bought my jeep I put 2 new ones on and now have replaced my passenger agaun and think my drivers is bad I jacked it up its not horrible but jeep guys/mechanics I hear a very loud not rattling but high pitched squeaking that only occurs when im in motion and its been getting louder I thought it would be like a grinding noise but is this the sign of it just starting to go out or something else? And sorry for all this nonsense if it doesn't make any sense pm me and ill give u my phone number so u can call me and I can let u hear the sound its that weird and I refuse to goto a shop because from now on im the one who does the work on this thing thanks to haynes manual but im just really broke and don't wanna buy a wheel bearing if its not what the prob is thanks guys please help a jeeper out so I can go wheeling worry free again lol

peep

Check to see there is not a splash shield contact of the disc rotor, or the pads causing the squeel. I did have one wheel hub come in that the casting ***** for the bolts actually contacted my passenger side rotor. (Junk overseas stuff) That hub was in same carquest box, close inspection and exchanged it for qualtiy made in USA product, no more problem. We do couple of Hub jobs every day at our shop. Seems more common these days than fuel pumps. There is good better best available. I have the SKF, made in USA, 200,000 km and still going. I tell the customers that the price is the same for the cheap one as the good one. Seen the cheap ones fail by next day. Yes the part is warrantied, the labour is not. Try to go with the Home Made brand, the offshore is really inferior qualtiy. Could the sqeel be fan belt?
For alignment get couple tape measures, boards, and a buddy. Set alignment 0 straight ahead to 1/8" max toe in. I run 1/16 toe in with 3.5 lift. Second problem as we lift up is we loose caster, need to add some shims. Check out GOJEEP.com for a real good write up on the caster adjustment and how to homemade cheap caster shims. Good luck!

PFC.FARRALL

I've had somewhat of a similar problem. Have someone else drive her past you so you can pinpoint exactly where the sound is coming from. If you only hear it when you driving sometimes it be be something grinding against you driveshaft, a belt, e.t.c. and you think it's coming from you bearings/brakes. If it truly is from the bearing/brakes/e.t.c. and you just replaced them then it's most likely a spacing problem and you need to re-shim or take everything off, clean it all, and put it back on making sure everything is seated properly. When we wheel hard we're always knocking stuff out of place, loosening stuff, and getting crap wedged where it doesn't belong so sometimes nothing needs replacing just repositioning.

newguyhooah

when its the only girl you know that likes it when you "check her oil!"

cperk

When your XJ has 250K miles on it and you still think you have a while before the engine needs a rebuild.

When you live in England and you are still collecting parts for your XJ in Ohio so you can REALLY fix it up when you get back..

Moving to the Mojave in a few months... over 120* last summer... time to look at new radiators!

mr baer

Know that feeling
She also loves it when I was her back lol

96xjclassic

YKYDAXJW you get all excited and happy when you pick up a can of seafoam after work!!

sycoglitch

Lol and napa has it on sale for 6.46. Time to stock up

96xjclassic

Hell yeah! I've got a Napa near my house!

sycoglitch

Ha ha likewise. About 7 mins from me

sycoglitch

YKYDAXJW You have to buy your GF something just because you naught something for your rig and she would complain otherwise

-Dom-

When you can't wait till you get your stinger!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!$!!!!!!!

96xjclassic

So true, my wife pulls that s*** all the time. Even worse, If I don't buy something equal I feel guilty!