When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Well, I had to mod both the stock and replacement tail light housings to accommodate my aftermarket bumper, but the new one appears to fit just like the stocker. One note, the gasket on the back is kinda stiff, and won't allow the mounting tabs to bottom out on the body. Use caution tightening the fasteners, or you may crack one, necessitating a repair:
I bought a new one for my 99 and also had fitment issues with it and ended up buying a used one from a parts Jeep $30 for both in VG condition. After a bit of polish they came out looking almost as well as the new ones.
What bumper did you use that made you have to modify the tail lights to fit?
Last edited by Fred/N0AZZ; 03-12-2016 at 11:34 AM.
I bought a new one for my 99 and also had fitment issues with it and ended up buying a used one from a parts Jeep $30 for both in VG condition. After a bit of polish they came out looking almost as well as the new ones.
What bumper did you use that made you have to modify the tail lights to fit?
Rockhard4x4 Patriot rear bumper with tire carrier.
If I still had the original bumper, there would have been no fitment issues.
01-17-2016, 11:00 AM
OEM Tail Light Lens
