Painting Parts
#16
CF Veteran
Thread Starter
Join Date: Jun 2011
Location: Colorado
Posts: 2,448
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0
That's what I figured. I do like the idea of bed lining my arms though.. Since I'm really considering making my own long arms, so I'd need some additional protection. And bed liner comes in red, so it'll match!
#17
CF Veteran
Join Date: Mar 2012
Location: Albuquerque, NM
Posts: 3,404
Likes: 0
Received 1 Like
on
1 Post
Year: 1995
Model: Cherokee
Engine: 4.0
Originally Posted by 92XJGuy
Clear seal recommended? I suppose I could pick some up after I finish painting the coils, and before I put them on.
Would bed lining be better for the arms and stuff? I'd think bed lining on coils would fall off/chip, no? And sweet, thanks!
#18
Senior Member
Join Date: Jul 2012
Posts: 722
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L I6
I just did my coils and shocks with Rustoleum Pro, prime and paint. Then some clear coat from Rustoleum as well. I don't know if I'd recommend it. Next time I will be powdercoating everything that is colored and everything that is black will be Raptor Lined. I think it turned out pretty well but I don't think the Rustoleum pro will last very long.
Either way, make sure you are prepping properly. Your paint job is only as good as your prep job.
Either way, make sure you are prepping properly. Your paint job is only as good as your prep job.
Last edited by CrawlinPepper; 09-15-2012 at 08:16 PM.
#19
CF Veteran
Join Date: Mar 2012
Location: Albuquerque, NM
Posts: 3,404
Likes: 0
Received 1 Like
on
1 Post
Year: 1995
Model: Cherokee
Engine: 4.0
Originally Posted by CrawlinPepper
I just did my coils and shocks with Rustoleum Pro, prime and paint. Then some clear coat from Rustoleum as well. I don't know if I'd recommend it. Next time I will be powdercoating everything that is colored and everything that is black will be Raptor Lined. I think it turned out pretty well but I don't think the Rustoleum pro will last very long.
Either way, make sure you are prepping properly. Your paint job is only as good as your prep job.
Either way, make sure you are prepping properly. Your paint job is only as good as your prep job.
#20
Senior Member
Join Date: Jul 2012
Posts: 722
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L I6
#21
CF Veteran
Join Date: Mar 2012
Location: Richmond, VA
Posts: 1,369
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Why? It's rubbery enough to flex and it's not going to stiffen the springs by any noticeable amount.
#22
CF Veteran
Thread Starter
Join Date: Jun 2011
Location: Colorado
Posts: 2,448
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0
I just did my coils and shocks with Rustoleum Pro, prime and paint. Then some clear coat from Rustoleum as well. I don't know if I'd recommend it. Next time I will be powdercoating everything that is colored and everything that is black will be Raptor Lined. I think it turned out pretty well but I don't think the Rustoleum pro will last very long.
Either way, make sure you are prepping properly. Your paint job is only as good as your prep job.
Either way, make sure you are prepping properly. Your paint job is only as good as your prep job.
Very true.. We'll see I suppose.
#23
Seasoned Member
Join Date: Sep 2010
Location: Mitchell Co. NC.
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: big 6
Ive used rustoleum on a number of things and i love it. I did the underbody of a camaro with it and while working on another part with a grinder with a flap disk i accidentily hit it and it hardly made a mark on it. Also ive used it on bumpers ive made with no primer at all and it sticks great everytime. Just make sure its completely dry between coats.as far as prep on freshly painted or coated parts i always use a 600 or 800 wet paper because you have way less sanding marks. It really just needs a quick scrub on the fresh stuff. The only thing negative i can say is the color fades when washed a lot or in the sun. On my own jeep i repaint my bumper completely every 4 or 5 months or so because i use it as an example of my work
Last edited by Driftunit; 09-15-2012 at 11:29 PM.
#25
CF Veteran
Thread Starter
Join Date: Jun 2011
Location: Colorado
Posts: 2,448
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0
So I just put this text decal on my bumper, the letters are raised and could be pretty easy to remove a certain section of the decal and make it look silly. Is there a clear coating spray I could put over this to hopefully prevent it or make it harder to peel off?
And could I use that same spray on the coils?
And could I use that same spray on the coils?
#26
Senior Member
Join Date: Jul 2012
Posts: 722
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L I6
You can spray a clear coat over it but you might want to consider doing the whole bumper because it may make the area that you sprayed shinier than the rest of the bumper.
If you sprayed the bumper white where the decal goes, placed the sticker, then painted the entire bumper black you could remove the decal and it would've been painted into your bumper so you wouldn't have to worry about the decal peeling or anything. Plus then you could clear coat the entire thing and be done.
If you sprayed the bumper white where the decal goes, placed the sticker, then painted the entire bumper black you could remove the decal and it would've been painted into your bumper so you wouldn't have to worry about the decal peeling or anything. Plus then you could clear coat the entire thing and be done.
#27
CF Veteran
Thread Starter
Join Date: Jun 2011
Location: Colorado
Posts: 2,448
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0
You can spray a clear coat over it but you might want to consider doing the whole bumper because it may make the area that you sprayed shinier than the rest of the bumper.
If you sprayed the bumper white where the decal goes, placed the sticker, then painted the entire bumper black you could remove the decal and it would've been painted into your bumper so you wouldn't have to worry about the decal peeling or anything. Plus then you could clear coat the entire thing and be done.
If you sprayed the bumper white where the decal goes, placed the sticker, then painted the entire bumper black you could remove the decal and it would've been painted into your bumper so you wouldn't have to worry about the decal peeling or anything. Plus then you could clear coat the entire thing and be done.
Thanks
#28
Senior Member
Join Date: Jul 2012
Posts: 722
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L I6
That would work as long as you have a few cm around the lettering for the clear to seal the corners. It will probably still have some shiny-ness to it, but I'm sure it would seal it a bit more. Worth a shot!
#29
CF Veteran
Thread Starter
Join Date: Jun 2011
Location: Colorado
Posts: 2,448
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0
I picked up some Rust-oleum clear coat, decided to just spray the decal, see how it comes out. Jeep is usually too dirty to notice the difference between shiny/not lol. I just hope this clear coat protects the coils. I did two coats yesterday, I'm thinking of just putting a coat or two on them now and hope for the best.