roll cage pipe
#16
Junior Member
#18
CF Veteran
Join Date: Mar 2012
Location: Richmond, VA
Posts: 1,369
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
#20
Member
Join Date: Jul 2012
Location: Buckeye AZ
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
#22
Junior Member
Sure, if you already have a bender or want to build your cage with no bends in it. I figure I'd have twice as much invested had I used DOM and bought a bender.
... not really. You can build a cage for less than 700 bucks including the price of a bender?
No, I couldn't find the same link I bought mine from either. It used to be right on their website.
When I click your link it tries to make me download some Zen Cart bull ****.
No, I couldn't find the same link I bought mine from either. It used to be right on their website.
When I click your link it tries to make me download some Zen Cart bull ****.
#23
Junior Member
Found in Google images.
Maybe this link works.
http://barnettperformance.net/index....&products_id=7
This cage comes with plates intended to sandwich the floor and bolt down.
It really needs to be braced to the unibody.
It also limits the use of your glove box. Other than that, it fits great and retains alot of factory interior room and leg room.
I added harness bars and big *** X behind my front seats.
Maybe this link works.
http://barnettperformance.net/index....&products_id=7
This cage comes with plates intended to sandwich the floor and bolt down.
It really needs to be braced to the unibody.
It also limits the use of your glove box. Other than that, it fits great and retains alot of factory interior room and leg room.
I added harness bars and big *** X behind my front seats.
Last edited by Lowrange2; 10-22-2012 at 01:34 PM.
#25
CF Veteran
Join Date: Mar 2012
Location: Richmond, VA
Posts: 1,369
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
#26
CF Veteran
Join Date: Jun 2011
Location: Colorado
Posts: 2,448
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0
#27
Junior Member
#28
CF Veteran
Join Date: Mar 2012
Location: Richmond, VA
Posts: 1,369
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
The DOM is well under $700.
You typically don't factor in the cost of tools on something like this as it's a separate expense but you can build a bender with .25 wall square tube, a bottle jack, and die for under $300.
#30
Junior Member
I'm sure you could I'll be damned if I'm building a whole cage using vertical bottle jack pipe kinker.
I'm referring to a quality bender. None of that harbor freight style junk.
I'm referring to a quality bender. None of that harbor freight style junk.