Tow bar and towing questions
#1
Member
Thread Starter
Join Date: Oct 2017
Location: OKC
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee(SJ)
Engine: 6 CYL HO
Tow bar and towing questions
Okay. I have always trailered my rigs, but I am thinking about using a tow bar. I will be towing the XJ about 500 miles.
1st. Is it okay to pull it that far with a tow bar and what precautions should I take?
2nd. What is a good tow bar set for the XJ?
I will probably have more questions as this goes, but I appreciate any help.
Thank you.
1st. Is it okay to pull it that far with a tow bar and what precautions should I take?
2nd. What is a good tow bar set for the XJ?
I will probably have more questions as this goes, but I appreciate any help.
Thank you.
#2
CF Veteran
Join Date: Oct 2011
Location: SEMO
Posts: 1,394
Likes: 0
Received 8 Likes
on
8 Posts
Year: 2000
Model: Cherokee (XJ)
Engine: 4.0 L6
Is this just a one-time trip to tow the XJ? If it is, if I were you I would consider renting a tow dolly. Flat towing can get a little squirrelly. What vehicle will you use as a tow rig?
#3
Member
Thread Starter
Join Date: Oct 2017
Location: OKC
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee(SJ)
Engine: 6 CYL HO
We would be using my son's z71 crew cab to tow it.
#4
CF Veteran
I use a Blue Ox tow bar/blaseplate combination. The baseplate that works for the pre '97 XJs is this one: (You didn't mention the year of your XJ)
http://www.blueox.com/products/basep...jeep-cherokee/
They make several different tow bars with varying features.
#5
Member
Thread Starter
Join Date: Oct 2017
Location: OKC
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee(SJ)
Engine: 6 CYL HO
I've never had this problem, but I've always flat towed XJs that were stock behind a motorhome. I barely know they are back there, and it's nice not to have to deal with a trailer or dolly when you get to where you're going. I can see how a lifted XJ could be problematic if things aren't squared away properly though.
I use a Blue Ox tow bar/blaseplate combination. The baseplate that works for the pre '97 XJs is this one: (You didn't mention the year of your XJ)
http://www.blueox.com/products/basep...jeep-cherokee/
They make several different tow bars with varying features.
I use a Blue Ox tow bar/blaseplate combination. The baseplate that works for the pre '97 XJs is this one: (You didn't mention the year of your XJ)
http://www.blueox.com/products/basep...jeep-cherokee/
They make several different tow bars with varying features.
#7
CF Veteran
I agree, I flat towed an XJ behind a '94 Grand one time, and around tight corners such as on/off ramps you had to take it pretty easy. The motorhome is a different story though.
Trending Topics
#8
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,971
Received 1,559 Likes
on
1,263 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
The XJs were designed to be flat towed and the instructions are in the owner's manual.
#9
CF Veteran
Join Date: Oct 2011
Location: SEMO
Posts: 1,394
Likes: 0
Received 8 Likes
on
8 Posts
Year: 2000
Model: Cherokee (XJ)
Engine: 4.0 L6
Please explain. A tow dolly with the transfer case in neutral, trans in park is worse on the drivetrain than flat towing? I know people who have done this with an XJ for thousands of miles with no issues. I know that in itself doesn't make it right, and I'm aware of what my manual says, but what is it about the XJ design that necessitates flat towing? My understanding is that later-model NP231's (somewhere after '93 or '94?) have a "true" neutral that allows dollying. Of course, if you disconnect the rear drive shaft and strap it up out of the way, the type of neutral shouldn't matter anyway.
Last edited by Tbone289; 02-05-2018 at 03:04 PM.
#10
Member
Join Date: Jan 2018
Location: Poulsbo,Wa
Posts: 186
Likes: 0
Received 7 Likes
on
7 Posts
Year: 1994
Model: Cherokee (XJ)
Engine: 4.0
Tow Bar
Okay. I have always trailered my rigs, but I am thinking about using a tow bar. I will be towing the XJ about 500 miles.
1st. Is it okay to pull it that far with a tow bar and what precautions should I take?
2nd. What is a good tow bar set for the XJ?
I will probably have more questions as this goes, but I appreciate any help.
Thank you.
1st. Is it okay to pull it that far with a tow bar and what precautions should I take?
2nd. What is a good tow bar set for the XJ?
I will probably have more questions as this goes, but I appreciate any help.
Thank you.
#11
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,971
Received 1,559 Likes
on
1,263 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Please explain. A tow dolly with the transfer case in neutral, trans in park is worse on the drivetrain than flat towing? I know people who have done this with an XJ for thousands of miles with no issues. I know that in itself doesn't make it right, and I'm aware of what my manual says, but what is it about the XJ design that necessitates flat towing? My understanding is that later-model NP231's (somewhere after '93 or '94?) have a "true" neutral that allows dollying. Of course, if you disconnect the rear drive shaft and strap it up out of the way, the type of neutral shouldn't matter anyway.
Last edited by cruiser54; 02-06-2018 at 06:43 AM.
#12
CF Veteran
Join Date: Oct 2011
Location: SEMO
Posts: 1,394
Likes: 0
Received 8 Likes
on
8 Posts
Year: 2000
Model: Cherokee (XJ)
Engine: 4.0 L6
My manual doesn't state that nor does it have any similar warnings, and note that I mentioned tying up the prop shaft disconnected at the rear. The transfer case wouldn't leak in that case. Regardless, if there is no interaction front to rear of a transfer case in neutral, ("true" neutral as I stated above) as is the case with my NP231, I fail to see how the transfer case or transmission can be damaged even if you don't disconnect the driveshaft.
Any chance that you can answer my question, rather than just taking a "because I know" approach? What I'm looking for is an explanation or theory, not just "the manual says don't do it so don't do it". I appreciate your knowledge, but I prefer to understand the "why" of things rather than simply going on an opinion, professional or not.
Any chance that you can answer my question, rather than just taking a "because I know" approach? What I'm looking for is an explanation or theory, not just "the manual says don't do it so don't do it". I appreciate your knowledge, but I prefer to understand the "why" of things rather than simply going on an opinion, professional or not.
Last edited by Tbone289; 02-06-2018 at 10:19 AM.
#13
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,971
Received 1,559 Likes
on
1,263 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
My manual doesn't state that nor does it have any similar warnings, and note that I mentioned tying up the prop shaft disconnected at the rear. The transfer case wouldn't leak in that case. Regardless, if there is no interaction front to rear of a transfer case in neutral, ("true" neutral as I stated above) as is the case with my NP231, I fail to see how the transfer case or transmission can be damaged even if you don't disconnect the driveshaft.
Any chance that you can answer my question, rather than just taking a "because I know" approach? What I'm looking for is an explanation or theory, not just "the manual says don't do it so don't do it". I appreciate your knowledge, but I prefer to understand the "why" of things rather than simply going on an opinion, professional or not.
Any chance that you can answer my question, rather than just taking a "because I know" approach? What I'm looking for is an explanation or theory, not just "the manual says don't do it so don't do it". I appreciate your knowledge, but I prefer to understand the "why" of things rather than simply going on an opinion, professional or not.
I'm saying that you can't take a blanket approach to using a tow dolly. The transfer cases changed through the years. Best to consult the owners manual for your year and transfer case.
That said, they ALL can be flat towed without issues. Providing of course the proper procedures are employed.
#14
CF Veteran
Join Date: Oct 2011
Location: SEMO
Posts: 1,394
Likes: 0
Received 8 Likes
on
8 Posts
Year: 2000
Model: Cherokee (XJ)
Engine: 4.0 L6
OK, understood. I was aware of a change of the transfer case, but wasn't sure when the changeover happened. At the time I suggested the dolly we didn't know what model year the OP had, and I should have asked that first.
Thanks for taking the time to humor me!
Thanks for taking the time to humor me!
#15
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,971
Received 1,559 Likes
on
1,263 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
I've never found a comprehensive list of what can and cannot be towed with one axle on the ground. Being in the business, I erred on the side of caution so I didn't have to buy trannies and/or transfer cases.