Cherokee Chat General non-tech Cherokee chat
XJ/MJ/ZJ/WJ

Want to lift but on a budget.

Thread Tools
 
Search this Thread
 
Old 04-30-2012 | 08:33 PM
  #1  
texjeepcowboy's Avatar
Thread Starter
Newbie
 
Joined: Apr 2012
Posts: 26
Likes: 0
From: Breinigsville, PA
Year: 1996
Model: Cherokee
Engine: 4.0L Straight-6
Default Want to lift but on a budget.

I just bought my XJ. I really wanna put bigger tires on and lift it and all that fun stuff. But of course, I'm only 17 and I work a low-paying job. What are your best suggestions, and what are the cheapest, well-working lifts and tires you know? Thanks.
Old 04-30-2012 | 08:37 PM
  #2  
bnkk's Avatar
Seasoned Member
 
Joined: Aug 2011
Posts: 349
Likes: 0
From: Tunkhannock PA
Year: 99
Model: Cherokee
Engine: 4L
Default

Buy tires used keep eye on forums. For lift id recomend the rough country kit for a cheap lift with shocks, or do a shackle spacer lift.

Really i wish id listened to others and saved for a 4.5" kit with arms,trac bar,etc. By the time i redo what i got and get the extras i could have saved a good chunk of money.
Old 04-30-2012 | 08:38 PM
  #3  
Scott0821's Avatar
Banned
 
Joined: Feb 2012
Posts: 948
Likes: 0
From: Ohio
Year: 1999
Model: Cherokee
Engine: 4.0l i6
Default

Check out zone offroad
Old 04-30-2012 | 08:41 PM
  #4  
XJ Stryker's Avatar
CF Veteran
 
Joined: Apr 2008
Posts: 7,661
Likes: 14
From: Smiths Station, Al
Year: 87
Model: Wagoneer
Engine: 4.0 I6
Default

If you got junk yards around there is a lot you can do. Search budget boost and bastard packs. Tires will cost ya just keep searching local forums and craigslist. If you have couple hundred bycks google Treadright for some retreads.
Old 04-30-2012 | 08:42 PM
  #5  
theBrew99XJ's Avatar
Member
 
Joined: Dec 2011
Posts: 230
Likes: 1
From: Central Maine
Year: 1999
Model: Cherokee
Engine: 4.0 HO
Default

I run a 3" RC aal in mine and ran about $375 with shipping. For a jeeper on a budget I would recommend RC not the greatest out there but I have had no problems and I know two other with similar XJs running the same lift one longer than I have it and there has held up good. My only other suggestion is if you can round up some used parts and make a custom lift if your good with automotive. You can easily fit up to 31s w/o trimming and probably 32's with trimming. Good Luck!
Old 04-30-2012 | 08:43 PM
  #6  
cherokee90's Avatar
Senior Member
 
Joined: Jun 2010
Posts: 524
Likes: 0
From: austin texas
Year: 1998
Model: Cherokee
Engine: 4.0
Default

http://www.roughcountry.com/jeep_xj_3.html

255 before shipping and easy 3" lift cut fenders then stuff some 32 or 33 tires on it.
Old 04-30-2012 | 08:43 PM
  #7  
Zack92MJ's Avatar
CF Veteran
 
Joined: Jun 2011
Posts: 2,460
Likes: 0
From: Dayton, Ohio
Year: 1992
Model: Comanche
Engine: 4.0
Default

Well first off research research research! There is lots of threads on this, and being on a budget you need to look everything up! And secondly i would recommend bastard packs and tbird coils. 4.5" of lift for 100 bucks.
Old 04-30-2012 | 08:49 PM
  #8  
Scott0821's Avatar
Banned
 
Joined: Feb 2012
Posts: 948
Likes: 0
From: Ohio
Year: 1999
Model: Cherokee
Engine: 4.0l i6
Default

Originally Posted by Zacks98
Well first off research research research! There is lots of threads on this, and being on a budget you need to look everything up! And secondly i would recommend bastard packs and tbird coils. 4.5" of lift for 100 bucks.
Doesn't it ride like a dump truck though?
Old 04-30-2012 | 08:56 PM
  #9  
texjeepcowboy's Avatar
Thread Starter
Newbie
 
Joined: Apr 2012
Posts: 26
Likes: 0
From: Breinigsville, PA
Year: 1996
Model: Cherokee
Engine: 4.0L Straight-6
Default

I don't want to trim my fenders by the way.
Old 05-01-2012 | 06:49 AM
  #10  
theBrew99XJ's Avatar
Member
 
Joined: Dec 2011
Posts: 230
Likes: 1
From: Central Maine
Year: 1999
Model: Cherokee
Engine: 4.0 HO
Default

Originally Posted by cherokee90
http://www.roughcountry.com/jeep_xj_3.html

255 before shipping and easy 3" lift cut fenders then stuff some 32 or 33 tires on it.
Thats without add-a-leafs thoug and lower control arms which would be a bit better, and if you want to spend about $200 more than the price I listed you can get all new set of leaf springs to help prevent a sagging rear(which sucks)
Old 05-01-2012 | 09:43 AM
  #11  
Culprite's Avatar
Seasoned Member
 
Joined: Apr 2012
Posts: 486
Likes: 6
From: Glen Burnie Maryland
Year: 1987
Model: Cherokee
Engine: 4.0 6l
Default

what the hell is a basturd pack? i was not aware leaf springs had parents ...
Old 05-01-2012 | 10:29 AM
  #12  
bigvig's Avatar
Senior Member
 
Joined: Nov 2009
Posts: 904
Likes: 3
From: Maine
Year: 1999 Sport
Model: Cherokee
Engine: I6
Default

Bastard pack is when you take apart your leafs, insert an extra leaf and put them back together. TONS of threads on the subject.
Old 05-01-2012 | 10:45 AM
  #13  
Culprite's Avatar
Seasoned Member
 
Joined: Apr 2012
Posts: 486
Likes: 6
From: Glen Burnie Maryland
Year: 1987
Model: Cherokee
Engine: 4.0 6l
Default

thank you
Old 05-01-2012 | 11:24 AM
  #14  
Gee oh Dee's Avatar
CF Veteran
 
Joined: Sep 2010
Posts: 21,168
Likes: 5
From: Milwaukee, WI
Year: 1987
Engine: Check
Default

Moved to Chat.
Old 05-01-2012 | 11:34 AM
  #15  
LittleMeanPurpleMachine's Avatar
Member
 
Joined: Mar 2011
Posts: 208
Likes: 1
From: Edmonton, Alberta, Canada
Year: 1998
Model: Cherokee
Engine: 4.0 I6
Default

http://www.rocklizardfabrications.co...dget_boost.htm


Quick Reply: Want to lift but on a budget.



All times are GMT -5. The time now is 01:28 AM.