What did you do to your Cherokee today?
06-21-2011 | 04:51 PM
Seasoned Member
Joined: May 2011
Posts: 370
Likes: 2
From: Calgary, AB
Year: 99
Model: Cherokee
Engine: 4.0
Gave her a fancy car wash last night, then polished out all the scratches. And because I'm so cunning I went to a place that has a 48 hour weather guarantee. Polished out the scratches while in the garage while it was pissing rain. Now I'm just going to go back today and have all the residual gunk and wipe marks washed away.
I know, I'm cheap.
I know, I'm cheap.
06-21-2011 | 05:38 PM
Newbie
Joined: Dec 2009
Posts: 5
Likes: 0
From: Georgia
Year: 1999
Model: Cherokee
Engine: v6 4.0l
built a shelf and cupholders for back seat I also built a "dipspensor"
I built a shelving unit which i used the stock spare tire holder to secure it down.
And I built a cup holder into the back seat and built a dip dispensor to hold a log and a half of dip. (just a personal touch ha)
I have also painted the interior grey for a more relaxing feel
And I built a cup holder into the back seat and built a dip dispensor to hold a log and a half of dip. (just a personal touch ha)
I have also painted the interior grey for a more relaxing feel
06-21-2011 | 05:40 PM
CF Veteran
Joined: Dec 2010
Posts: 9,897
Likes: 2
From: shawnee,ks
Year: 1993
Model: Cherokee
Engine: 4.0
Replaced the pcv elbow, by far the easiest thing I have done on it so far! Also painted a little bit of the grill. And I'm still trying to finish welding in the floor so I can put my passenger seat back in
Last edited by wiggles; 06-21-2011 at 08:20 PM.
06-21-2011 | 07:03 PM
CF Veteran
Joined: Dec 2010
Posts: 6,880
Likes: 0
From: Frederick, Maryland
Year: 1996
Model: Cherokee
Engine: 4.0 I-6 High output
Sounds slightly meaner when revving, maybe a little bit better pickup. The whole hot air thing is futile with the horrible design jeeps came with. The little restrictor had no insulation and it had holes so im sure hot air was present no matter what, maybe even more with the restricted tube. Resistance makes heat!
Sent from my iPhone using the mud i dont wash off of my Cherokee...
Sent from my iPhone using the mud i dont wash off of my Cherokee...
06-21-2011 | 08:02 PM
Senior Member
Joined: Jan 2010
Posts: 602
Likes: 3
From: LARRYVILLE
Year: 1998
Model: Cherokee
Engine: 4.0
Originally Posted by 96xjclassic
I went to take out mine today, and it was already gone! So I just cleaned my throttle body and put a coat of heat resistant rattle can on my air box and put it all back.
Sent from my iPhone using the mud i dont wash off of my Cherokee...
06-21-2011 | 08:02 PM
Seasoned Member
Joined: Jun 2011
Posts: 281
Likes: 1
From: Garden Prairie
Year: 2000, (1957 Willys)
Model: Cherokee
Engine: 4.0L
Got the manifolds off! Ready to pull the head. Bearings, water pump, oil pump, thermostat on the way. I bought someones headache!
Cracked 0331 head, and my guess is that he overheated it. I test the thermostat today and it was still shut at boiling.......
2000 Cherokee Sport. Nearly perfect shape. 108,000 Never been off of pavement.
Cracked 0331 head, and my guess is that he overheated it. I test the thermostat today and it was still shut at boiling.......
2000 Cherokee Sport. Nearly perfect shape. 108,000 Never been off of pavement.
06-21-2011 | 09:24 PM
Senior Member
Joined: Dec 2010
Posts: 588
Likes: 0
From: Peterborough, Ontario, Canada
Year: 1998
Model: Cherokee
Engine: 4.0L
All I did with her today was finish the wiring for the rear doorless:
Still debating if I should rolled the rear quarters, as the one is pretty rotted behind the trim..
Still debating if I should rolled the rear quarters, as the one is pretty rotted behind the trim..
06-21-2011 | 09:36 PM
CF Veteran
Joined: Dec 2010
Posts: 6,880
Likes: 0
From: Frederick, Maryland
Year: 1996
Model: Cherokee
Engine: 4.0 I-6 High output