What did you do to your Cherokee today?
07-06-2011, 08:39 PM
CF Veteran
Join Date: Dec 2010
Location: Frederick, Maryland
Posts: 6,880
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 I-6 High output
07-06-2011, 09:12 PM
Senior Member
Join Date: Jun 2010
Location: Stafford Va
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
Cleaned my NSS and distributor cap along with the wires. Just have to clear the check engine light. Hopefully it works, there was a lot of mud and grime in both.
07-06-2011, 09:18 PM
Seasoned Member
Join Date: Mar 2011
Location: Powhatan, VA
Posts: 491
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0 I6
Changed the front diff oil and seal today because I noticed the slight whine/growl at around 2000rpm, no more, no less. I knew that I had a leak in my front diff so I thought the oil had just gotten low enough to make the noise. After a replaced the seal and oil I still had the noise. I did some investigating and discovered that I can reproduce the noise while in park and reving to 2k rpm. So that eleminates the diff. Tomorrow I will run the engine without the belt to narrow it down to either the engine or one of the pullies. Its funny becuase the noise only occurs around 2k rpm, nothing higher, nothing lower.
07-06-2011, 11:01 PM
Senior Member
Join Date: Oct 2010
Posts: 948
Likes: 0
Received 1 Like
on
1 Post
Year: 1995
Model: Cherokee
Engine: straight 6
Originally Posted by Jeep95
Got the driver side tail light done this is before paint an reverse light. Will finish pass one tmrw since I got a day off.......
07-06-2011, 11:50 PM
CF Veteran
Join Date: Jan 2011
Location: Missouri
Posts: 2,251
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0HO
started work on my tire carrier... just retrofitting an S10 Blazer carrier... my buddy had a 35 on his, so a 33 should be cake
today I fixed the lug pattern... cut and rewelded the carrier, went from the s10's 5 x 4.75 to the XJ's 5 x 4.5
maybe I will start on the mounts and braces soon
today I fixed the lug pattern... cut and rewelded the carrier, went from the s10's 5 x 4.75 to the XJ's 5 x 4.5
maybe I will start on the mounts and braces soon
07-07-2011, 01:17 AM
Senior Member
Join Date: Jan 2011
Posts: 596
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Originally Posted by mrfajita
Got a new o2 sensor, installed it. Runs great now, no more full rich or black smoke, burning cat smell, or check engine light.
Sent from my iPhone using CherokeeFM
07-07-2011, 01:54 AM
CF Veteran
Join Date: May 2010
Location: Fort Collins, CO
Posts: 3,405
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1996
Engine: 4.0L HO
The old one came out pitch black because of it running full rich.