cdawall

tan!

sycoglitch

Didn't do much to my rig tonight. My girl did get me some goodies for my bday a few days ago. I asked her if it was gonna be a lift kit but she said she had no idea even how to go about trying to get one. Oh well I do like these anyways

96xjclassic

Mounting it might be a challenge, but I will see what I can do. Do you have a light in the center of the rear? If so take off the lens and see if its held on by two rods with special washers. If thats what you have then, you are good to go!

96xjclassic

You'll have to buy the lift yourself! That's how it usually works! Nice gear!

cdawall

its in the front and i have no idea what it looks like i will check tomorrow i am going to have to pull the headliner anyway as its falling down and gross so if its just a bracket i can add i guess?

96xjclassic

If you pull the headliner, then it will be real easy to install. In the rear on the last cross member
in the center there will be two holes inline front to back. If you find those your gold! Pm me in a few days to let me know what you find out!

cdawall

flippin sweet now i am all excited

cball917

been keeping up with all the posts. all great stuff. tonight i finally took a pic of one of my projects. this is my false floor that i built tonight. waited till home depot had some scrap stuff in the cheap pile and found it today. it measures 28" deep and 42" wide. and no i did not build it to fit the plastic coke rack but it did fit nicely. :-) hope you guys enjoy. pic i before i put it in. i will get a pic tomorrow when its light outside. the white box in top right corner is a waterproof first aid kit that i found in a box to be thrown away at ld employer. its waterproof

-Dom-

^^^NICEEEE

Didn't do anything to the jeep today but I did go & buy some spray undercoat to do the gray trim on the doors, but I will have to wait for tomorrow to start it. To dark out.

countrycherokee

Attempted at the stripped bolt to get my bumper off... failed. Also started sanding some paint and removed the side moldings on the doors. makes a big difference... basically prepping for the paint job that will eventually happen,

Cnwxj

Sweat my *** off and pulled my interior. Gearing up to do evap a d heater core.

Cnwxj

I think you need to fire your machine shop! My friend when to a shop like that. Went like this, " that rebuilt eng may have a bit of a knock when it's cold". Maybe it's time to recalibrate the old micrometer buddy! Good luck

twisselmaster

Removed the rear hatch, wired in molex connectors for the wires so i can quickly disconnect them, still working on hinge modifications... finish up tomorow

mrfajita

Found a new parking spot at my house, but now I don't want to take the concrete the rest of the way out.
From this angle it looks lower but the curb is about 18" off the ground. Front sway connected and all 4 wheels on the ground (barely, the rear right is almost off)

srhcherokee24

I put a 162 miles on her went threw a crazy storm and played on some fludded roads