What did you do to your Cherokee today?
#1726
Member
Join Date: Nov 2008
Location: Los Angeles
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0 I6
Got Pirelli Scorpions, new U-joints and a new drive shaft. Should have it back tonight from the shop since I didn't have time to do it myself
#1727
Senior Member
Join Date: Nov 2008
Location: south bend indiana
Posts: 958
Likes: 0
Received 7 Likes
on
6 Posts
Year: 1993
Model: Cherokee(XJ)
Engine: 4.0 i six H.O.
Red Muck....In our 91 XJs we have the disconnect style front axle. Which disconnects the passenger side front wheel from the rest of the front drivetrain. When in 2HI, you're right, the front drive is disconnected from the TC. So, in stock form nothing in the front drive turns in 2HI except the passenger side front wheel and half shaft. On the driver's side the wheel, axle and spider gears, inside the carrier, all turn. The carrier and front drive shaft donnot. Now, when you screw things up by taking out the OEM spider gears and side gears and replace them with a "lunchbox" style locker, the carrier and front drive shaft turn right along with the driver's side front wheel while in 2HI, now. When I select 4HI or 4LO and lock my "homebrew" axle lock, the differential locker works as advertised. The front wheels remain locked together until going around a corner causes a difference in wheel speed. Then the locker unlocks allowing the turn to be made without tire skid.
#1728
CF Veteran
Join Date: Nov 2008
Location: Oak Harbor, WA.
Posts: 6,989
Likes: 0
Received 4 Likes
on
4 Posts
Year: 1987
Model: Cherokee
Engine: 4.0 liter RENIX I-6, DIY Cold Air Intake, 2.5 FM Exhaust, 3 Core Radiator
No worries, brother. That's why we're all here. All together, we're smarter than any one of us all alone. That is a sweet 91 you have, BTW!!
#1729
CF Veteran
I just had an HID headlight kit installed on my XJ, they are 100x better than my stock sealed beams. I'm just gonna keep an eye out for some better housings. The projectors I got of ebay are okay, but there is so much more potential. It seems like they could be better focused to bring out their full potential, they have a pattern, but the pattern sort of glares at the top, it's hard to explain. Please, if somebody knows a really good housing to get that doesn't blind other drivers, please let me know!
#1730
CF Veteran
Join Date: Aug 2008
Location: palm desert,ca
Posts: 1,313
Likes: 0
Received 1 Like
on
1 Post
Year: 1987
Model: Wagoneer
Engine: 4.0
i replaced the cap, rotor, spark plugs and wires. then checked the o2 and got a funky reading so i replaced that too, also found out that the po doesnt know how to tighten an o2 sensor, it was hand tight. but before all that i seafomed that baby. runs better but not perfect yet. i did take her out for a little spin and broke my seat cause i gunned it and its never had power before, well my fat rump broke the seat this time, butt dyno works
#1731
Resident Pirate
Join Date: Nov 2008
Location: Orlando-Chickamauga
Posts: 3,877
Likes: 0
Received 3 Likes
on
3 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
thought about selling mine, im going to college this fall(3.5 hours away), and to be honest it doesn't get good gas millage, its good for an xj but not that good......
#1732
Seasoned Member
Join Date: Nov 2008
Location: Blairsville, PA
Posts: 429
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L home brew Snorkle
just drove to work and back. i gotta find a local spot to wheel a little. and it started snowing today
#1733
Seasoned Member
Join Date: Sep 2008
Posts: 329
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
Well, it's not so much what I did TO my XJ today, but rather what I did FOR my XJ today....
I cleared out my 10x10' storage unit today, and stuffed it all in a 5x7' storage unit...a savings of about $85 per month...
which I plan to spend on my XJ!
I cleared out my 10x10' storage unit today, and stuffed it all in a 5x7' storage unit...a savings of about $85 per month...
which I plan to spend on my XJ!
#1737
Senior Member
Join Date: Aug 2008
Location: Battle Creek, MI
Posts: 847
Likes: 0
Received 2 Likes
on
2 Posts
Year: '92
Model: Cherokee
Engine: 4.0
Tried to replace pinion and axle seals just find that the pinion bearing is shot...
The kicker is that I was doing this during a snow storm here in MI...
Oh well, screw it, time to take her to a shop...
The kicker is that I was doing this during a snow storm here in MI...
Oh well, screw it, time to take her to a shop...
#1738
Seasoned Member
Join Date: Dec 2008
Location: 25 Miles From Moab!
Posts: 348
Likes: 0
Received 4 Likes
on
4 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
I filled up for 28 bucks Ohh and went wheelin on another short trail. It was an unnamed trail on a unnamed mesa just above Moab. Pics were taken by me so no action shots.
And some of the view along the way...
And some of the view along the way...