What did you do to your Cherokee today?
10-02-2011 | 06:49 PM
Newbie
Joined: Sep 2011
Posts: 21
Likes: 0
From: Northern NJ
Year: 1998
Model: Cherokee
Engine: 4.0L
Repaired Transmission Cooling line leak by using a Dorman replacement kit http://www.dormanproducts.com/p-28969-800-612.aspx
Everything went well with it. Had to disconnect Radiator hose and remove air intake to get access to Quick Disconnect Fitting.
Had to cut trans line with pipe cutter but no flanges required as the kit has a compression fitting.
Next up:Valve Cover Gasket Replacement.
Everything went well with it. Had to disconnect Radiator hose and remove air intake to get access to Quick Disconnect Fitting.
Had to cut trans line with pipe cutter but no flanges required as the kit has a compression fitting.
Next up:Valve Cover Gasket Replacement.
10-02-2011 | 07:03 PM
Junior Member
Joined: Apr 2011
Posts: 63
Likes: 0
From: Ontario, Canada
Year: 98 5.9 Limited
Model: Grand Cherokee
Engine: 5.9
i dont get to drive the zj much so any chance i get i do, with that said i drove it 2 blocks to tim hortons and back about 10 minutes ago
10-02-2011 | 07:13 PM
CF Veteran
Joined: Apr 2011
Posts: 3,144
Likes: 3
From: central PA
Year: 2000
Model: Cherokee
Engine: 4.0
on topic, i changed my swaybar bushings
10-02-2011 | 07:46 PM
Moderator of Jeeps
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
I see it's on FB. When you're looking at the picture on facebook, hit F6 at the top of your keyboard, then Enter. Then right-click on the picture and click Copy image URL (or something similar depending on your browser). Paste that address into the post instead.
10-02-2011 | 07:53 PM
Seasoned Member
Joined: Sep 2010
Posts: 411
Likes: 1
From: F'n Kansas
Year: 2000
Model: Cherokee
Engine: 4.0
Cleaned up some areas on the fenders to help stop some rubbing with the new tires and rims.
Also cut down front bumper caps. Removed the lower half where the fog lights were and the plastic piece that ran along the bottom of the bumper.
Before
After
Also cut down front bumper caps. Removed the lower half where the fog lights were and the plastic piece that ran along the bottom of the bumper.
Before
After
10-02-2011 | 07:56 PM
Moderator of Jeeps
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
That'd be the air dam that you cut off. And your XJ looks amazing! That's about what I want mine to look like.
10-02-2011 | 08:01 PM
Senior Member
Joined: Nov 2008
Posts: 959
Likes: 7
From: south bend indiana
Year: 1993
Model: Cherokee(XJ)
Engine: 4.0 i six H.O.
changed my rear brakes with everything new. pad was broke off one of the passenger side shoes. what a pain in the azz,i need 4 hands.
10-02-2011 | 09:00 PM
CF Veteran
Joined: Dec 2010
Posts: 6,880
Likes: 0
From: Frederick, Maryland
Year: 1996
Model: Cherokee
Engine: 4.0 I-6 High output
10-02-2011 | 09:13 PM
CF Veteran
Joined: Jun 2010
Posts: 2,093
Likes: 1
From: Placerville, CA
Year: 1989
Model: Cherokee
Engine: 4.0 Inline 6
I replaced the tie rod end boots, because they burst from the tie rod roll....and also found my anti sway bar was touching my passengers side coil spring...so I fixed that.
10-02-2011 | 09:24 PM
CF Veteran
Joined: Apr 2011
Posts: 3,144
Likes: 3
From: central PA
Year: 2000
Model: Cherokee
Engine: 4.0
