What did you do to your Cherokee today?
01-03-2012, 09:36 PM
Senior Member
Join Date: Nov 2011
Posts: 561
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
I got cold and wet. In my '99 I had to pull the DS tire, remove the inner plastic fender and remove the two 5/16" screws from the engine side of the fender. Ya get to the front screw between the airbox and front frame. Had to pop loose the headlight harness for straight on access. Then you reach under and up to the reservoir with your right hand and use a small screwdriver to "pop up" the front tab of the tank. Slide it forward a scoch and pull the filler neck out from its rubber grommet. At this point I get wet feet and slide my bucket over. Slide down to the left and out. The "bottom" pump is the front one. Mine was full and soaked the floor, my foot, my right leg, and barely caught half of it. If I had to do it again I'd pop one of the outputs off and wait for it to drain first. Had a time crunch.
01-04-2012, 02:21 AM
CF Veteran
Join Date: Jan 2011
Location: Maine
Posts: 1,375
Likes: 0
Received 3 Likes
on
2 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L I6
His throat hurt... so he soaked it in cider.
Coherent sentences are becoming more challenging.
Today I drove mine through some fields at 1:30 in the morning to watch the meteor shower.
Coherent sentences are becoming more challenging.
Today I drove mine through some fields at 1:30 in the morning to watch the meteor shower.
01-04-2012, 02:23 AM
Moderator of Jeeps
Join Date: Jul 2011
Location: Frederick, MD from Cleveland, OH
Posts: 21,029
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1993 YJ Wrangler
Engine: 4.0 I6
01-04-2012, 02:50 AM
Moderator of Jeeps
Join Date: Jul 2011
Location: Frederick, MD from Cleveland, OH
Posts: 21,029
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1993 YJ Wrangler
Engine: 4.0 I6
It took my up the mountain so the light pollution wasn't quite as bad. Couldn't get any pics of the target, so I played a little.
01-04-2012, 06:19 AM
Senior Member
Join Date: Nov 2011
Location: Tampa, FL & DC/MD infrequently
Posts: 758
Likes: 0
Received 1 Like
on
1 Post
Year: 2000
Model: Cherokee
Engine: 4.0L I6
It'll be for when the seat back is up (clear bottom half), but a full divider is easy to build too. If you are interested, let me know. I can sketch up a concept. In many ways, the full divider is easier.
01-04-2012, 06:40 AM
CF Veteran
Join Date: Mar 2011
Location: South Bend, IN
Posts: 1,273
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.6 stroker
01-04-2012, 07:39 AM
CF Veteran
Join Date: Nov 2011
Location: Manchester, N.H.
Posts: 1,122
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0 HO
Same symptoms? If so I'll let you know what eventually fixes it. Please do the same should you get it fixed first
LOL. But seeing as it was 4 degrees on my ride in to work, I dont think ill be doin much today! Supposed to be mid 40s this weekend, so im determined to get it figured out. Good luck to us all.
LOL. But seeing as it was 4 degrees on my ride in to work, I dont think ill be doin much today! Supposed to be mid 40s this weekend, so im determined to get it figured out. Good luck to us all.
01-04-2012, 07:45 AM
CF Veteran
Join Date: Nov 2011
Location: Manchester, N.H.
Posts: 1,122
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0 HO
Need a few opinions. Ill make my own as usual, but here is the deal. Im painting my lift and all aftermarket stuff bright green my front axle is semigloss black. Im about to paint my diff cover green. But Im really thinking about painting a green middle finger design. here is the pic. Ill be doing it without the needle(its my local tattoo shop)
Attachment 85908
Attachment 85908
with a similar design in the center of the bumper and used to get hell when i street drove it. But I loved it
They are we todd did....
01-04-2012, 09:58 AM
CF Veteran
Join Date: Aug 2011
Location: Palm Beach Florida
Posts: 1,296
Likes: 0
Received 1 Like
on
1 Post
Model: Cherokee
Engine: 4.0L HO
Originally Posted by Blood Of An Akrobat
painted my grill black<img src="https://www.cherokeeforum.com/attachment.php?attachmentid=85891"/>
cut square steel tubing and made a roof rack for lumber<img src="https://www.cherokeeforum.com/attachment.php?attachmentid=85892"/>
replaced the diff fluid, sanded, and painted diff cover<img src="https://www.cherokeeforum.com/attachment.php?attachmentid=85893"/>
cut square steel tubing and made a roof rack for lumber<img src="https://www.cherokeeforum.com/attachment.php?attachmentid=85892"/>
replaced the diff fluid, sanded, and painted diff cover<img src="https://www.cherokeeforum.com/attachment.php?attachmentid=85893"/>