What did you do to your Cherokee today?
Newbie
spent the WHOLE day tryin' to figure out where I went wrong adding extra "back-up" lights to my 98 GC Laredo.
I really screwed the pooch this time, hooked up the new lights, NOW -- NO back-ups at all, no turn signals, no rear wiper or overhead info display. I'm stuck.
I really screwed the pooch this time, hooked up the new lights, NOW -- NO back-ups at all, no turn signals, no rear wiper or overhead info display. I'm stuck.
CF Veteran
Join Date: May 2010
Location: Western Michigan
Posts: 1,680
Likes: 0
Received 4 Likes
on
4 Posts
Year: 1993
Model: Grand Cherokee
Engine: 4.0l inline 6
spent the WHOLE day tryin' to figure out where I went wrong adding extra "back-up" lights to my 98 GC Laredo.
I really screwed the pooch this time, hooked up the new lights, NOW -- NO back-ups at all, no turn signals, no rear wiper or overhead info display. I'm stuck.
I really screwed the pooch this time, hooked up the new lights, NOW -- NO back-ups at all, no turn signals, no rear wiper or overhead info display. I'm stuck.
Senior Member
Join Date: Nov 2011
Location: Manhattan, Kansas
Posts: 928
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0L
Originally Posted by Drivingmad
spent the WHOLE day tryin' to figure out where I went wrong adding extra "back-up" lights to my 98 GC Laredo.
I really screwed the pooch this time, hooked up the new lights, NOW -- NO back-ups at all, no turn signals, no rear wiper or overhead info display. I'm stuck.
I really screwed the pooch this time, hooked up the new lights, NOW -- NO back-ups at all, no turn signals, no rear wiper or overhead info display. I'm stuck.
CF Veteran
Join Date: Feb 2012
Location: Hamburg, NY
Posts: 1,258
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
1) Installed my CB (bracket, cable, & CB). Now I have to find someone to talk to........
2) How long do you go without a front liscense plate on your new(er) winch bumper???? 1, 2, 3 tickets later. Ya 3 tickets, now it's time to install it.
Before:
After:
2) How long do you go without a front liscense plate on your new(er) winch bumper???? 1, 2, 3 tickets later. Ya 3 tickets, now it's time to install it.
Before:
After:
Banned
Join Date: Feb 2012
Location: Ohio
Posts: 948
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0l i6
Junior Member
Join Date: Feb 2012
Location: East Coast North Atlantic
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
Made a water pump inlet tube.
It is all brass and it can be installed without having to remove anything. Just have to heat and bend the old one, unscrew it out.. then fasten this one in place with some rtv hi temp thread sealant. Also have a longer heater hose to use since the brass one I made is half the size of the old one.
Replaced my water pump a few months ago and at the time reused the old inlet tube when I should have replaced it with a new one while it was off.
Id rather have this brass one though anyways so I guess it worked out
It is all brass and it can be installed without having to remove anything. Just have to heat and bend the old one, unscrew it out.. then fasten this one in place with some rtv hi temp thread sealant. Also have a longer heater hose to use since the brass one I made is half the size of the old one.
Replaced my water pump a few months ago and at the time reused the old inlet tube when I should have replaced it with a new one while it was off.
Id rather have this brass one though anyways so I guess it worked out
No, I don't lick fish.
Painted my grill black with rustoleum truck bed spray
Before:
Attachment 95395
Attachment 95396
After:
Attachment 95398
Attachment 95399
Attachment 95400
O and the side molding is off because I am painting that as well
Before:
Attachment 95395
Attachment 95396
After:
Attachment 95398
Attachment 95399
Attachment 95400
O and the side molding is off because I am painting that as well
Senior Member
Join Date: Jan 2011
Location: Green Bay Wisconsin
Posts: 677
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0L High Output
Cleaned it out. Was pretty dirty. I more or less live out of it most of the time. Put in the passengers side speaker. Most of my day has been spent trying to figure out the CB set up i should put in it.
Member
Join Date: Mar 2011
Location: Houston
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
Replaced my front wheel bearings. Much easier than I thought it would be, rust wasn't a hindrance. Took me about an hour, and I had time to clean up and listen to my wife come outside and tell me why we needed a fancy new hairdryer that ionizes the air that comes out... Anyways, it didn't fully fix my issue, but it is much, much better! Still feel some vibes at idle speed. I'm not going to worry anymore about it for now.
Junior Member
Join Date: Jan 2012
Location: Bloomington, Indiana
Posts: 41
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Installed new wiper blades, spark plugs, plug wires, liftgate support arms, shocks and a magnetic oil drain plug. Added some power steering, brake and transmission fluid.
Next up leaf springs, a 2 inch budget boost and a roof rack.
Next up leaf springs, a 2 inch budget boost and a roof rack.
CF Veteran
Join Date: Sep 2010
Location: Mercer County, NJ
Posts: 12,692
Likes: 0
Received 4 Likes
on
4 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L I6 HO
Originally Posted by caronaxtr
1) Installed my CB (bracket, cable, & CB). Now I have to find someone to talk to........
2) How long do you go without a front liscense plate on your new(er) winch bumper???? 1, 2, 3 tickets later. Ya 3 tickets, now it's time to install it.
Before:
After:
2) How long do you go without a front liscense plate on your new(er) winch bumper???? 1, 2, 3 tickets later. Ya 3 tickets, now it's time to install it.
Before:
After: