Phil99

Started taking my exhaust off to put a dynomax super turbo cat-back on tomorrow

5spd-XJ

Trimmed my fenders to make them ready for the TJ flares... well I have to finish the left rear wheel well tomorrow. (ran outa time) I will try my best to make a write-up for installing the flares. There are already a few write-ups for trimming so i didn't bother

Phil99

Put on a new dynomax cat back

jeepride

Removed the rear sway bar !!

littleblueman

Drove to work the other morning and when i got out, sigh, an antifreeze leak. Popped the hood and saw that a po had removed the fan shroud at some time, and the fan had been shaving the side out of the overflow tubing to the bottle. Back to the parts store, buy a new length of hose, clamps, popped the hood again and installed a nice new heavy overflow tube, routed it out of harms way and closed her up. Good for another 1000.

99xjlove

I painted my stock cast 5 spoke rims, ordered a C-Rok inner steering box brace, and yesterday I ordered a 99 durango steering box! Pictures can be seen here https://www.cherokeeforum.com/f46/99-sport-project-re-5-5-la-sye-8-8-install-1885/

DustysXJ

I changed out the drivers side hub on the 97 xj I just picked up! 1 of many things already done and yet to do!

Kyle

You should really do both at the same time.

87xjco

Uhmm, I got a little carried away today, kind of embarrassing!!

Two_Jeeps

Replaced a rotten sway bar bushing with a strip cut-out from a can koozie. It appears to be the same denisity as the one that fell out.

No, it's not permanent but it's working for the meantime.

aircruiser

nice flames..should be yellow instead of white though

just gonna drive it to work and back today. hopefully go muddin soon.

muddeprived

That's pretty cool.

Those are nasty control arm angles though

jeepride

Replaced my driver's side wheel bearing will replace passanger side next month!!

Belto

saw it getting rained on...

finneys98xj

Saw it crying as I got on the Chesse Wagon this morning.