What did you do to your Cherokee today?
#4471
Senior Member
Join Date: Apr 2009
Location: New Waverly, Tx
Posts: 954
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1997
Model: Cherokee
Engine: Used engine just put in less than 79kmiles onit jeepersCreepers 60mm TB, '99-'01 intake, BorlaHeader
O2 sensor
Changed cat forward O2 sensor. When u do this its a good Idea to erase the old ECU or PCM memory.
1.Disconect the positive Battery cable and touch it to ground side for 30sec to a min.
2.Reconnect battery
3.Turn ignition Switch to 'ON' but do not start the engine.
4.Turn headlights 'ON'
5.Turn headlights 'OFF'
6.Turn Ingnition key 'OFF'
1.Disconect the positive Battery cable and touch it to ground side for 30sec to a min.
2.Reconnect battery
3.Turn ignition Switch to 'ON' but do not start the engine.
4.Turn headlights 'ON'
5.Turn headlights 'OFF'
6.Turn Ingnition key 'OFF'
#4472
Senior Member
Join Date: Jul 2009
Location: Yelm Wa
Posts: 822
Likes: 0
Received 1 Like
on
1 Post
Year: 1990
Model: Cherokee
Engine: 4.0
i changed the oil in my ram, also cleaned up the oxiadtion off the headlights and found out i need to replace them due to the face brackets are broken. Stupid old owner!
#4475
Senior Member
Join Date: Nov 2008
Location: south bend indiana
Posts: 958
Likes: 0
Received 7 Likes
on
6 Posts
Year: 1993
Model: Cherokee(XJ)
Engine: 4.0 i six H.O.
finally painted my back bumper this past week. just hope it wont peel like the front one did last time. primering and painting the front one tomorrow nov.1st.
#4476
just painted my front bumper as well, and loaded 120PSI into the rear shocks for that caddy ride.
oh, fixed the radio wiring and speaker wiring as well, and flushed the radiator.
oh, fixed the radio wiring and speaker wiring as well, and flushed the radiator.
#4477
Senior Member
Join Date: Oct 2009
Location: NW Florida
Posts: 537
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1999
Model: Grand Cherokee
Engine: 4.0
Pulled the carpet back in the cargo area to kill a little rust, prime it, and spray in a rubberized bed coating. Once it dries I'll put the carpet back and button everything back up.
#4479
CF Veteran
Join Date: Sep 2009
Location: NC
Posts: 5,376
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Yesterday: used it to help brother move his crap out of my house. In the process I found a mini mud hole and drove through it, just once and slow because I didnt want to mess up someone elses property (little mud hole on the side of the driveway leading to my brothers apartment complex) Now I finally have some mud on the Jeep!
The day before yesterday: Bought supplies to change the front/rear diffs....way more expensive than I had suspected!
The day before yesterday: Bought supplies to change the front/rear diffs....way more expensive than I had suspected!
#4481
Member
Join Date: Jul 2009
Location: Glendale, AZ
Posts: 232
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0 I6
I finally got around to ordering and installing a track bar for my size lift. Got the rock krawler track bar with the double sheer conversion bracket for the frame. Install only took about and hour and man did it make a difference. Bump steer is gone and it finally drive straight down the road with no extra effort.
#4483
CF Veteran
Join Date: Feb 2009
Location: Genoa, IL
Posts: 3,270
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L
Changed the oil, brakes, rotors, spark plugs, spark plug wires, cleaned the interior, washed and waxed, retuned the cb, replaced the battery and thats pretty much it, it was a busy day.