What did you do to your Cherokee today?
Junior Member
Join Date: Aug 2013
Location: Arcadia, CA
Posts: 44
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Grand Cherokee
Engine: 5.2l V-8
New oil, oil filter, air filter, replaced bulb under hood, and recharged my a/c . Lift kit from tuff country should be here tomorrow so hopefully ill install it soon.
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,971
Received 1,559 Likes
on
1,263 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,971
Received 1,559 Likes
on
1,263 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
CF Veteran
Join Date: Jul 2011
Location: JOCO
Posts: 4,521
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Engine: 4.0 Inline 6
That looks so sketchy. After watching a friend almost get squished by his chevy because of cinder blocks, i'll never use them for that purpose. At the very least, put something in place of that bottle jack and put a piece of 2x between the cinder block and the jack stand. One bump and that thing is history.
Senior Member
Join Date: Aug 2009
Location: Tulsa,Oklahoma
Posts: 838
Likes: 0
Received 0 Likes
on
0 Posts
Year: 97
Model: Cherokee
Engine: 4.0
the PO sprayed the top half of my xj with black rattle can primer, said because the clear coat was coming off and faded.. well the hood was all cracked up and is super thick underneath, not sure whats up with that but I started thinking it had hail damage and was bondo but under the hood looks fine...
anyway once I sand down the worst part of the jeep (hood) the rest should be pretty straight forward, then I'll be spraying it black two stage... !!!
anyway once I sand down the worst part of the jeep (hood) the rest should be pretty straight forward, then I'll be spraying it black two stage... !!!
Seasoned Member
Join Date: Jul 2012
Location: Loosiana
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Installed my CB antenna spring, and a PA speaker. Also cleaned it up, going to change the rotors and brakes this weekend or next to get ready for my next 9 months back at college, 250 miles away.
CF Veteran
Join Date: Mar 2011
Location: California
Posts: 2,570
Likes: 0
Received 4 Likes
on
4 Posts
Year: 1992
Model: Cherokee
Engine: 4.0 HO
Installed shackle relocation brackets, h&t SYE on the np242, replaced DS u joints, replaced my bent tie rod with a chromoly tie rod, and installed bilsteins on all four corners.
No more driveline vibes, and a MUCH smoother ride with the proper shackle angle and good shocks. Couldn't be happier.
No more driveline vibes, and a MUCH smoother ride with the proper shackle angle and good shocks. Couldn't be happier.
CF Veteran
Join Date: Apr 2011
Location: Carrollton, GA
Posts: 14,553
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
Adjusted my track bar, shortened my driver lower long arm, and went for a test drive with my phone on my bumper!
CF Veteran
Join Date: Mar 2011
Location: California
Posts: 2,570
Likes: 0
Received 4 Likes
on
4 Posts
Year: 1992
Model: Cherokee
Engine: 4.0 HO
Member
Join Date: Jul 2011
Location: Paducah KY
Posts: 234
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0