When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Amazingly, ... neither of those will fit Cherokee headlights, 1 is for foglights, other is for small rectangle lights ... ?
Thanks for the . response . ?
Actually, the second link that is described as "Fog Lights" is the EXACT kit I used...
OK..., ok...!
fine. - I mean, thanks :-)
-
-
...but i found they may be Illegal in WA. ~ok found it:
(2) Pursuant to Title 49 C.F.R. Part 571.108, the addition of an aftermarket style ornament or other feature such as tinted plastic glass covers, a grille or allotted covers must not be placed in front of the headlamp lens, or in front of any other lighting devices installed on motor vehicles which impair the effectiveness of lighting equipment required under 49 C.F.R. Part 571.108 (FMVSS 108) or chapter 46.37 RCW. Except:
(a) Clear aftermarket headlamp covers.
(b) Headlamp wipers may be used in front of the lens provided that the headlamp system is designed to conform to all applicable photometric requirements in 49 C.F.R. Part 571.108 (FMVSS 108) with the wiper stopped in any position in front of the lens.
I think i can get away with it
Last edited by RacerX; 02-24-2015 at 03:43 PM.
Reason: RCW text added
Actually, the second link that is described as "Fog Lights" is the EXACT kit I used...
No, seriously... exact. same. product. and seller. So you're welcome.
Looks like the headlight retaining ring is part of the guard. Is that correct? If so, I may have to pick a pair up myself. Ended up getting a set of plastic headlights because I got tired of replacing broken glass sealed beams.
Been waiting for an important part since Friday, without it I am grounded
You want details? The PO bridged the fuel pump fuse but never fixed the cause of blown FP fuses. Long story short I never noticed the jumper because I wasn't having any problems, we got some wet weather, things shorted and fried PCM
FINALLY picked up my Jeep from the shop after being down since October! Immediately took it to get smogged. Passed with flying colors! The new engine is doing great! It sure does climb hills much more easily.
Received my BAFX Bluetooth OBD2 scan tool and downloaded Torque on my old Galaxy Tab. Ran the diagnostics check and everything looked good then drove around and admired all the fancy gauges.