What did you do to your Cherokee today?
CF Veteran
Join Date: Jan 2013
Location: west chester, pa
Posts: 19,216
Likes: 0
Received 40 Likes
on
36 Posts
Year: 1999
Engine: 4.0
What did you do to your cherokee today?
Originally Posted by 93_xjcherokee
Got a master cylinder and proportioning valve at a junkyard for $16 to get rid of my abs.
Moderator of Jeeps
Join Date: Jul 2011
Location: Frederick, MD from Cleveland, OH
Posts: 21,029
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Member
Join Date: Apr 2015
Location: Youngstown Ohio
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Pb and new shackles
Sprayed down the old leaf springs with PB Blaster and Picked these up!! New in box, stickers and all for 40 bucks!! Guy only used the front part of the kit. Daystar 1 inch shackles
Seasoned Member
Join Date: Nov 2014
Location: So. Cal.
Posts: 333
Likes: 0
Received 0 Likes
on
0 Posts
Installed new stock Coil springs, bump stops and steering damper. Kinda disturbed that the front did not raise up more than I thought it would.
Everything is stock.
I did the rear Tuesday (stock leafs) and now the back end is sitting much higher than the front even with new springs? Hopefully the leafs will settle in, Maybe Ill drive around with some bricks in the back along with my 90 pound floor jack.
Everything is stock.
I did the rear Tuesday (stock leafs) and now the back end is sitting much higher than the front even with new springs? Hopefully the leafs will settle in, Maybe Ill drive around with some bricks in the back along with my 90 pound floor jack.
What did you do to your cherokee today?
Thank you. I was fortunate to get it off a guy in Harrison he had decided not to use it. I had looked real hard for this reflxxion hood.
::CF Administrator::
Installed new stock Coil springs, bump stops and steering damper. Kinda disturbed that the front did not raise up more than I thought it would.
Everything is stock.
I did the rear Tuesday (stock leafs) and now the back end is sitting much higher than the front even with new springs? Hopefully the leafs will settle in, Maybe Ill drive around with some bricks in the back along with my 90 pound floor jack.
Everything is stock.
I did the rear Tuesday (stock leafs) and now the back end is sitting much higher than the front even with new springs? Hopefully the leafs will settle in, Maybe Ill drive around with some bricks in the back along with my 90 pound floor jack.
The rear springs should settle down...did you put them on their own weight before tightening it all up?
::CF Administrator::
Seasoned Member
Join Date: Nov 2014
Location: So. Cal.
Posts: 333
Likes: 0
Received 0 Likes
on
0 Posts
Yes, I installed the front bolts and the rear bolts but left them loose, then lowered it to the ground and tightened up all the bolts. Thats what I have read on several different places.
::CF Administrator::
I didnt get very specific. The old coils were sagging and the PO or someone installed those rubber stop things on/between the coils, I jacked up the car and removed them before the new coil install and it sagged a huge amount, I did get some lift and was not expecting lift beyond stock.
Yes, I installed the front bolts and the rear bolts but left them loose, then lowered it to the ground and tightened up all the bolts. Thats what I have read on several different places.
Yes, I installed the front bolts and the rear bolts but left them loose, then lowered it to the ground and tightened up all the bolts. Thats what I have read on several different places.
Junior Member
Join Date: Feb 2015
Location: Utah
Posts: 66
Likes: 0
Received 1 Like
on
1 Post
Year: 1989
Model: Cherokee
Engine: I6
Found the cause of an annoying rubbing with my rear pass. leaf spring. Apparently I bashed my exhaust hanger just enough to rub the leaf clip-thingy. thought i had bent a shackle or twisted my spring.
Seasoned Member
Join Date: Nov 2014
Location: So. Cal.
Posts: 333
Likes: 0
Received 0 Likes
on
0 Posts