What did you do to your Cherokee today?
iPhone Mount
Installed my old iPhone in the overhead console. The bracket needs painted. But it's working great. Now all I have to do is get a new head unit and run the cables to there. I'd like it to all be hidden
Member
Joined: Sep 2015
Posts: 567
Likes: 0
From: North Fort Myers FL
Year: 2000
Model: Cherokee
Engine: 4.0 I6
man that is a great idea! I might go buy an iPod touch just to do that
Seasoned Member
Joined: Oct 2014
Posts: 383
Likes: 3
From: Buffalo NY
Year: 2000 shell
Model: Cherokee
Engine: 1998 4.0l I6
I replaced everything at the axles except the cylinders in the drums, I'm just waiting on my cousin to help me bleed the system
CF Veteran
Joined: Oct 2013
Posts: 5,920
Likes: 190
From: Greenville, SC
Year: 1999
Model: Cherokee(XJ)
Engine: 4.0
Originally Posted by Steven96XJ
Installed my old iPhone in the overhead console. The bracket needs painted. But it's working great. Now all I have to do is get a new head unit and run the cables to there. I'd like it to all be hidden
Installed new exterior window seals so hopefully it doesn't fill up like a bathtub when the snow melts this year. Already removed the rotted roof rack and filled the mounting holes. Helped but didn't totally fix the wet carpet issue.
Moderator of Jeeps
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
If it continues leaking, keep an eye on the windshield gasket. They're known to go bad after all these years. The other major culprit, on the passenger side, is the heater core. If that's leaking, you can usually smell coolant
Thanks for the ideas, but its not those. I've trailed the leaks from the headliner, then to the door seals. Now the water comes from the bottom of the door drain holes then between the rubber door seals and plastic trim. Not suprised, my poor XJ sat for 12 years outside, uncovered. Since I got it running again last summer I've been slowly forced to replace anything rubber.
Seasoned Member
Joined: Jan 2015
Posts: 398
Likes: 2
From: Metro Detroit
Year: 1999
Model: Cherokee
Engine: 4.0
Any CB knowledgeable people here? My CB worked great when it was in the dash wired to the radio harness for constant and key on power, but since I pulled that out and wired it up from the battery with a t tap for key on power, I get nothing but static even with squelch turned to max. I checked the antenna wire for a short and tested the mount for a good solid ground and those are good. Is there a rule for wiring to power and ground?