What did you do to your Cherokee today?
Senior Member
![Default](https://www.cherokeeforum.com/images/icons/icon1.gif)
I'm going to try an oil change with T6 5W40 this week, along with a NAPA Gold filter. I took the lazy way out for the drooping headliner for now, tacked it up with spiral upholstery tacks.
CF Veteran
Join Date: Jan 2013
Location: west chester, pa
Posts: 19,216
Likes: 0
Received 39 Likes
on
35 Posts
Year: 1999
Engine: 4.0
![Default](https://www.cherokeeforum.com/images/icons/icon1.gif)
On the long drive home from a weekend of wheeling, stopped for lunch and saw smoke billowing out from under the Jeep.... My TC output shaft seal went again, and real hard this time.... Fluid coating everything under the Jeep and a nice slick over the entire hatch. Picked up a new seal and started the process. When I got the seal out, I found the cause of all my troubles. The snap ring that sits behind the seal had a burr on it from when I had to replace the bearing. The fact that it got me a month and a half was surprising. Got the roto tool out and took the burr off and got everything put back together. Took the power washer out and got her cleaned up. I'll have to get a soap soak on the belly to get rid of the remaining ATF. Made use of the rest of the sunlight and rotated the tires.
Seasoned Member
Join Date: Jan 2015
Location: Metro Detroit
Posts: 398
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Senior Member
Join Date: Sep 2014
Posts: 739
Likes: 0
Received 5 Likes
on
5 Posts
Year: 2012
Model: Grand Cherokee (WK)
Engine: 3.6 V6
CF Veteran
Join Date: Jan 2013
Location: west chester, pa
Posts: 19,216
Likes: 0
Received 39 Likes
on
35 Posts
Year: 1999
Engine: 4.0
![Default](https://www.cherokeeforum.com/images/icons/icon1.gif)
agreed. I have leather seats on the crawler. Primarily because I don't want the seats to be soaking wet if I do water crossings or if it rain or whatever. The cloth seats are in my daily driver and it make shifting the gears (5speed) much more comfortable.
Seasoned Member
Join Date: Jan 2014
Location: Indianapolis, IN
Posts: 261
Likes: 0
Received 1 Like
on
1 Post
Year: 1993
Model: Cherokee
Engine: 4.0
![Default](https://www.cherokeeforum.com/images/icons/icon1.gif)
Getting serious now. Ordered full floor pans for driver and passenger side and a right rear quarter panel. Need to start taking out the interior.
CF Veteran
Join Date: Feb 2012
Location: Hamburg, NY
Posts: 1,258
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee