What did you do to your Cherokee today?
01-04-2016 | 06:39 AM
Moderator of Jeeps
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Seriously, though...
But you have a battery hold down, so you're safe! Stupid PA inspection requirements...
But you have a battery hold down, so you're safe! Stupid PA inspection requirements...
01-04-2016 | 07:35 AM
CF Veteran
Joined: Oct 2013
Posts: 5,920
Likes: 190
From: Greenville, SC
Year: 1999
Model: Cherokee(XJ)
Engine: 4.0
Sometimes you just have to ignore people, some mock your likes for their own ego issues.. FYI, I have a 5500w System in mine, two 15" Planet Audio "BIG BANGS" in a MegaBox, on a Planet Audio 5000W amp. I have a Pioneer 500w for the mids and highs, Electronic Crossover etc etc etc. Head units getting old and showing signs it's about to crap out, my multidisc CD player is under my rear seat drivers side.. That's enough about mine. I have used Boss speakers from Wally World in my YJ they were 12" on a RF Punch 150, they held up fine and I wound up giving them to my neighbor when I put in a new interior. anyhow moving along.. I Replaced my Upper Radiator hose it busted today, the Flange Gasket in front of the Catalytic Converter, adjusted my Serp Belt and a few other misc things.. Now I need to get another Electric Fan, I just replaced it last year..sheesh
01-04-2016 | 08:19 AM
CF Veteran
Joined: Jan 2012
Posts: 8,272
Likes: 1
From: Baltimore, MD
Year: 1999
Model: Cherokee
Engine: 4.0 I6 HO
Replaced my steering box spacer with one from C-rok that I got for free. Only broke 2 of the steering box bolts.
I may have heated the broken bolts up too much though. Possible leak in the steering box where the steering shaft is.
I may have heated the broken bolts up too much though. Possible leak in the steering box where the steering shaft is.
01-04-2016 | 11:18 AM
CF Veteran
Joined: Dec 2008
Posts: 1,226
Likes: 28
From: Penns Grove, NJ
Year: 1995
Model: Cherokee (XJ)
Engine: 2.5 4 cyl
Picked up parts from the store, ordered a new front and rear vacuum harness, and ordered material and lights for the new roof rack I'm building. Now I'm headed out to put 2 new tires on it.
01-04-2016 | 01:30 PM
CF Veteran
Joined: Jan 2015
Posts: 1,381
Likes: 3
From: Southern Maryland
Year: 1991
Model: Cherokee
Engine: 1999 4.0L
Yesterday--washed the mud off, bent some sheetmetal back in place, prepped a spare fender flare to replace the one that is completely smashed, replaced the fuel filter, bought a drain plug for my NP242-J/-WJ hybrid that has two switch indicator bosses, couple of other things.
01-04-2016 | 06:12 PM
CF Veteran
Joined: Aug 2010
Posts: 1,678
Likes: 0
From: Carlisle, PA
Year: 2000
Model: Cherokee
Engine: Inline 6
ordered new strongarm struts for the rear hatch. had the whole rear hatch drop on me when i was connecting a trailer, that **** didnt feel all that good.
01-04-2016 | 06:46 PM
Member
Joined: Sep 2015
Posts: 125
Likes: 0
From: AZ
Year: 00'
Model: Cherokee
Engine: I6 4.0 w/ 784 swap/ new connector tails
Got the cooling system finished, too think I could have gone hunting this weekend if I would have had the quick disconnect tool with me.... well now there is a set in the jeep and tool box at home... dang jeeps...
01-04-2016 | 09:16 PM
CF Veteran
Joined: Jul 2012
Posts: 4,104
Likes: 2
From: San Antonio, TX
Year: 1996
Model: Cherokee
Engine: 4.0L
01-04-2016 | 09:45 PM
Newbie
Joined: Jul 2012
Posts: 8
Likes: 2
From: Irving, Texas
Year: 1989
Model: Cherokee (XJ)
Engine: 4.0L
some do some don't- I don't know you or the other person either.
I was raised different, not to bash people over their ability to afford something you can or not.
Some call it Humor, Some call it putting people down....
Maybe I stepped into an INSIDE Joke- IDK, but now frankly IDC.
Enjoy your Evening, I am mine- Cya.
I've seen people Pushing the speakers with high gain to compensate for low wattage trying to get a bigger bang, and burn them up.
I learned the hard on a cheap amp trying to push some MTX subs in 1987 in my 68 GMC .
The P/A Big Bangs I have are the older 1800w DVC, and the P/A Anarchy Amp I have is stable down to 1 Ohm.
I haven't had a single issue in 4 years, but I don't use the Bass Boost gain ever, just my electronic crossover settings and O/A gain.
YMMV, we all use our toys in different manners, and forever **** happens we cannot control.
Enjoy-
RK
I was raised different, not to bash people over their ability to afford something you can or not.
Some call it Humor, Some call it putting people down....
Maybe I stepped into an INSIDE Joke- IDK, but now frankly IDC.
Enjoy your Evening, I am mine- Cya.
I learned the hard on a cheap amp trying to push some MTX subs in 1987 in my 68 GMC .
The P/A Big Bangs I have are the older 1800w DVC, and the P/A Anarchy Amp I have is stable down to 1 Ohm.
I haven't had a single issue in 4 years, but I don't use the Bass Boost gain ever, just my electronic crossover settings and O/A gain.
YMMV, we all use our toys in different manners, and forever **** happens we cannot control.
Enjoy-
RK
01-04-2016 | 09:47 PM
Seasoned Member
Joined: Dec 2013
Posts: 473
Likes: 0
From: SATX
Year: 1999
Model: Cherokee
Engine: 4.0 I6
Replaced/upgraded the headlight harness and on to H4's today. Liking the brightness but need to adjust the aim.
Last edited by gigemjeep; 01-04-2016 at 09:50 PM.
01-04-2016 | 09:58 PM
Newbie
Joined: Jul 2012
Posts: 8
Likes: 2
From: Irving, Texas
Year: 1989
Model: Cherokee (XJ)
Engine: 4.0L
Funny you mention that. Tx Inspection station tried to force a gas cap sale stating it was faulty. Last year, same inspector never checked cap. When I mentioned she didn't do that last time she got loud and stupid. I left and literally went down the street. Passed and on my way in five minutes.
Replaced/upgraded the headlight harness and on to H4's today. Liking the brightness but need to adjust the aim.
Replaced/upgraded the headlight harness and on to H4's today. Liking the brightness but need to adjust the aim.
hmm