When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Either deflate the tires enough to lower it some, or roll it out on a dolly or something then jack it up and put on the tires.
Yep. With 37s, you get really accustomed to using these lol. I actually keep a spare set of stock wheels without tires, and I install them when I need to get the Jeep even lower due to my lift. With the wheels resting on these dollies, I don't need tires
Last edited by NewKindOfClown; 07-26-2017 at 07:25 AM.
Yep. With 37s, you get really accustomed to using these lol. I actually keep a spare set of stock wheels without tires, and I install them when I need to get the Jeep even lower due to my lift. With the wheels resting on these dollies, I don't need tires
Put some of those dollies in the back, pull the rear driveshaft, go whip it around in front wheel drive haha
Finally washed it. The attendants at my drive through wash have to spray the Badger down when she's muddy, guess it's bad for the machine. Actually tipped the guy today, lol, took the poor guy nearly ten minutes to get it clean enough to let it be washed.
Once home I tallied up my souvenirs from the Hidden Falls trip. Lol, popped a couple flares loose, and a LOT of new scratches. But all in all not too bad.
Either deflate the tires enough to lower it some, or roll it out on a dolly or something then jack it up and put on the tires.
A pallet of water in the back will lower it down.
Once at work we brought a van loaded with bottled water into a parking garage. Forked the water out of the van and the van wouldn't fit through the door. Had to put the water back in and unload it out in the street.
changed the condenser yester day and got everything wired. got the system nearly completely charged when the discharge line blew and spewed all the refridgerant right back out
new crimp fitting on order
idk why the universe wont let me have a/c but it needs to quit its ****!
Soooooo Rob=0/AC=5,359?
Originally Posted by cleenrob
itd be funnier if you'd seen my flail when the line blew.
i was standing on my "rob cant reach anything cause he's too short" block, the line blew and i jumped back like a cartoon across the drive way and fell over.
I was trying to remember how I knew the instagram name. Now I remember I saw a picture of the jeep on Cherokee forum and instagram so I added you. It all make sense now.
Haha yeah I know a few people on here also on the 'gram. Glad to get another follower.
Well, not jus' today. Here's what Gus has gone through since July 2:
Engine puked on our way to Magruder Corridor 10 miles from home. Really glad it happened close to home vs. 70 miles in back country & 140 miles from home. Got towed home. Bought used engine w/64k miles.
I hate reinstalling stuff dirty so I replaced some wire loom, cleaned the rest, re-wrapped what needed it with a nylon-reinforced electrical tape.
Replacement motor now in and mated to tranny, torque converter, and front catalytic converters.
Prepping for new front engine cover and oil pan gasket & valve cover gasket.
Brown Dog engine mounts.
Having original intake manifold bead blasted.
Paint fuel rail.
New FlOWKOOLER water pump, fail-safe t-stat, new larger radiator. all hoses are <4 yrs old, so....
New spark plugs, cleaned coil(Gus is '01 so has coil head.. great design) & plug boots.
Serrvice K&N filter.
Service Transmission.
Fresh oil, of course.
Cleaning injectors.
I need to post pics of Gus. Will do once he's back together.
That's quite a lot, isn't it?
Well, not jus' today. Here's what Gus has gone through since July 2:
Engine puked on our way to Magruder Corridor 10 miles from home. Really glad it happened close to home vs. 70 miles in back country & 140 miles from home. Got towed home. Bought used engine w/64k miles.
I hate reinstalling stuff dirty so I replaced some wire loom, cleaned the rest, re-wrapped what needed it with a nylon-reinforced electrical tape.
Replacement motor now in and mated to tranny, torque converter, and front catalytic converters.
Prepping for new front engine cover and oil pan gasket & valve cover gasket.
Brown Dog engine mounts.
Having original intake manifold bead blasted.
Paint fuel rail.
New FlOWKOOLER water pump, fail-safe t-stat, new larger radiator. all hoses are <4 yrs old, so....
New spark plugs, cleaned coil(Gus is '01 so has coil head.. great design) & plug boots.
Serrvice K&N filter.
Service Transmission.
Fresh oil, of course.
Cleaning injectors.
I need to post pics of Gus. Will do once he's back together.
That's quite a lot, isn't it?
That's a pretty big list in a shade less than a month.
So doing a little bit of a few projects I have in the works. And when I say projects I use the term loosely because nothing compared to what you guys do. So I cleaned up the passenger seat bottom that I am going to turn into a driver's seat. Cleaned up one the map pockets I am going to double sided tape on my door panel. The carpet part was loose so I just peeled it off. Used this 3M 08984 that Pima recommended do get the glue residue off the plastic part. Stuff is great. Practically eats up the glue residue on its own. Haven't decided if I will use an adhesive out of a tube or double sided tape to put the carpet back on the plastic. I would use the map pocket door panels, I am OK with the fake wood grain, but not with the lighter color though. Maybe some year I will recover the wood grain ones in a darker color like USN_BlackWK did. Wire brushed my tow hooks, degreased and prepped so I can slap a little POR 15 on them. Also degreased and wire brushed my tranny crossmember. This is in preparation for hanging the TC Skid. Figure I will degrease again, metal prep, and POR 15 it before I do. Also wire brushed the metal for the driver's seat and it is soaking in Purple Power. At some point I will metal prep that and POR 15 too. But the tranny crossmember and seat metal are not getting done today. Just shooting for the tow hooks.