What did you do to your Cherokee today?
CF Veteran
Join Date: Feb 2011
Location: Bergen County, New Jersey U.S.A.
Posts: 3,074
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990 Laredo
Model: Cherokee
Engine: 4.0 Inline 6 Renix
I was bored and had a LED t10 bulb laying around... I put it in for my plate light...
CF Veteran
Join Date: May 2010
Location: Fort Collins, CO
Posts: 3,405
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1996
Engine: 4.0L HO
Ordered 50 red LEDs from ebay. Once they arrive, dash is getting torn apart and the dash lighting is getting overhauled. I will post a thread with lots of pics.
Senior Member
Join Date: Nov 2008
Location: south bend indiana
Posts: 958
Likes: 0
Received 7 Likes
on
6 Posts
Year: 1993
Model: Cherokee(XJ)
Engine: 4.0 i six H.O.
1am sunday morning i filled it up with gas and cleaned the salt off all the glass and front and rear lights,then went to taco bell.
Junior Member
Join Date: Dec 2010
Location: Bowling Green, Ky
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0 HO
what size led's did you order? i wanna do this too but someone said they need to be t4's and the bulbs are much bigger than that. what about the lights in the A/C control? shifter?
CF Veteran
Join Date: May 2010
Location: Fort Collins, CO
Posts: 3,405
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1996
Engine: 4.0L HO
CF Veteran
Join Date: Jul 2010
Location: WNY
Posts: 1,971
Likes: 0
Received 4 Likes
on
4 Posts
Year: 1999
Model: Cherokee
Engine: 4.0 High Output
Rotated the bald tires to the front of the 98 and pulled off the rear drums to find that all of the hardware and pads were brand new. Then found that the dumb@$$ who put the drums back together adjusted them so they had literally a quarter of an inch of movement. So re-adjusted the rear drums and the E-brake cable then put everything back together agian....mounting the roof rack tomorrow, And Davicl81 thats how my fluid looks in my 99 lol. I need to do the same thing.
Senior Member
Join Date: Dec 2010
Location: Michigan (Home state) Stationed in Montana
Posts: 882
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1993
Model: Grand Cherokee
Engine: 5.2L MPI V8 (318)
Lots of fun
During our big snow fall here in michigan in the past few days, I've blown a valve cover gasket torn up my new firestone snow tires, and my heat quit blowing hot air. Only ice cold. Fun stuff.
Member
Join Date: Sep 2010
Location: arcata, ca
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0L I-6
i've got the same thing: loud popping under driver's floorboard during low-speed turns, especially on hills or bumps). i've replaced the steering box, drag-link (zj swap/upgrade), tie-rod (rusty's hd), track bar (KOR double shear) steering stabilizer & front shocks (rancho 5000's). the tre's r good (new or "newer"). my steering has improved dramatically (i've got 31's on stock height). the popping is still there, next step is the lca's. any other ideas?
Seasoned Member
Join Date: Jan 2011
Location: New York
Posts: 294
Likes: 0
Received 1 Like
on
1 Post
Year: 1996
Model: Cherokee
Engine: 4.0L