What did you do to your Cherokee today?
Seasoned Member
Joined: Mar 2010
Posts: 388
Likes: 0
From: North, Ga
Year: 1995
Model: Grand Cherokee
Engine: 4.0
Got the new lower idler pulley installed. Pretty hard job with a lifted Jeep and a broken foot. Now to drive over a hour to pick up another motor for my celica. 2nd try at getting the right motor... dang I need something better on gas.
Senior Member
Joined: Jan 2011
Posts: 627
Likes: 2
From: Bedford, Pa
Year: 2000
Model: Cherokee
Engine: 4.0
Originally Posted by Defiance665
yeah...
What did you have to take your bottom support out for?
What did you have to take your bottom support out for?
Oh I didn't have to do that. I replaced my radiator tho awhile back. Although my bottom support should be fixed. I hit a deer awhile back and the bottom support is pushed back 4-6" as well as the AC condensor being bowed like a pretzel and the radiator being tweaked. The new one fit an you can't see that the support is bowed unless u crawl under it so I'm not worried about it.
Seasoned Member
Joined: Sep 2010
Posts: 329
Likes: 0
From: Tallahassee, FL
Year: 1999
Model: Cherokee
Engine: 4.0L
I just noticed some duct tape behind my glove box while trying to run an aux cable to it so after removing it I peeled back the duct tape and realized someone had cut a hole about 3"x2" into the.. whatever it is. The PO must have been hiding something he didn't want anyone to find.
CF Veteran
Joined: Jan 2011
Posts: 1,128
Likes: 3
From: Pacific Northwest
Year: 1999
Model: Cherokee
Engine: yes
Junior Member
Joined: Feb 2011
Posts: 47
Likes: 0
From: Orlando
Year: 1998
Model: Cherokee
Engine: 5.0
Purchased one. Put in a new AC condenser, cleaned out the interior real good, sat back, looked at it, and made big plans.
Last edited by Judge; 03-03-2011 at 05:24 PM.
Senior Member
Joined: Jan 2011
Posts: 627
Likes: 2
From: Bedford, Pa
Year: 2000
Model: Cherokee
Engine: 4.0
Originally Posted by Judge
Purchased one. Put in a new AC condenser, cleaned out the interior real good, sat back, looked at it, and made big plans.
CF Veteran
Joined: Feb 2011
Posts: 3,074
Likes: 0
From: Bergen County, New Jersey U.S.A.
Year: 1990 Laredo
Model: Cherokee
Engine: 4.0 Inline 6 Renix
Found a nail in my tire. Put on the spare. From being stored in the spare tire spot with only 15psi, the sidewall is deformed. Thing wobbles so bad, I'm glad its not on the front axle.
Registered Users
Joined: Feb 2011
Posts: 764
Likes: 0
From: Baltimore, Maryland
Year: 1989
Model: Cherokee
Engine: Inline 6
replaced the starter wire and battery terminals......what a mess -_-;;
also, realized some really simple, cheap modifications that will make my baby so badass its awesome.
list of ideas:
replacing the stock mirrors with full size, tripod style truck mirrors, or something similar
removing the triangular window thats in place for the view of the stock mirrors, putting wood in its place, painting eyes on the outsides of them, and painting the insides a yet undecided color, and mounting cupholders there
finishing painting the dash, and mounting a blacklight overhead to make the flourescent orange glow all pretty ^_^
taking a few ideas from the homebrew mods thread and doing these:
power inverter mounted under passengers seat, plugs in the back seat area so that they are accessible from the front and the back of the vehicle without much difficulty
putting a hub on the inside spare tire holder to make it easier to mount/unmount the spare ( its such a pain in the rear as it is now )
and something else thats currently slipping my mind
also, realized some really simple, cheap modifications that will make my baby so badass its awesome.
list of ideas:
replacing the stock mirrors with full size, tripod style truck mirrors, or something similar
removing the triangular window thats in place for the view of the stock mirrors, putting wood in its place, painting eyes on the outsides of them, and painting the insides a yet undecided color, and mounting cupholders there
finishing painting the dash, and mounting a blacklight overhead to make the flourescent orange glow all pretty ^_^
taking a few ideas from the homebrew mods thread and doing these:
power inverter mounted under passengers seat, plugs in the back seat area so that they are accessible from the front and the back of the vehicle without much difficulty
putting a hub on the inside spare tire holder to make it easier to mount/unmount the spare ( its such a pain in the rear as it is now )
and something else thats currently slipping my mind
CF Veteran
Joined: Sep 2010
Posts: 12,692
Likes: 4
From: Mercer County, NJ
Year: 2001
Model: Cherokee
Engine: 4.0L I6 HO
Oh and I put some white lithium grease on my door trunk and hood hinges before I gave it up for repairs. This weekend ima clean my battery terminals and dielectric it as well as silicone my window tracks some minor things to keep it smooth. And probably mopar FI cleaner too
CF Veteran
Joined: Sep 2010
Posts: 12,692
Likes: 4
From: Mercer County, NJ
Year: 2001
Model: Cherokee
Engine: 4.0L I6 HO
Originally Posted by XJUSMC
i made out with her in the driveway.