Whats the first things to do to a stock xj before hitting the trails?
#1
Whats the first things to do to a stock xj before hitting the trails?
Just wondering any ideas on what I should do before going off road my xj is completely stock with some pretty crapy tires, also when it's out in 4x4 it creeks an pops when I turn the steering wheel?
Trending Topics
#8
CF Veteran
Join Date: Jul 2013
Location: Monett, MO.
Posts: 7,554
Likes: 0
Received 15 Likes
on
15 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
DON"T!! Not until you find what is making all the noise it could very well spell trouble.
You need to go over your Jeep top to bottom changing all fluids and filters oil/trans/transfer case/both differentials/coolant drain and flush.
Then lube all the zerks and check for any problems with the front end and drive shafts. Once these are done a complete tune-up should be done plugs/wires/rotor and once all those are done take it out on the road and check it out there for any problems before any 4 wheeling.
Now for off road never go alone and make sure you have recovery straps and points on your XJ to pull from if stuck, very important. Be careful till you get used to your Jeep and what it will do "Safely" never overdrive it in the beginning or till you get hurt.
Good luck and enjoy.
You need to go over your Jeep top to bottom changing all fluids and filters oil/trans/transfer case/both differentials/coolant drain and flush.
Then lube all the zerks and check for any problems with the front end and drive shafts. Once these are done a complete tune-up should be done plugs/wires/rotor and once all those are done take it out on the road and check it out there for any problems before any 4 wheeling.
Now for off road never go alone and make sure you have recovery straps and points on your XJ to pull from if stuck, very important. Be careful till you get used to your Jeep and what it will do "Safely" never overdrive it in the beginning or till you get hurt.
Good luck and enjoy.
#9
Well I have new plugs and wires and a new pick up coil and oil change besides that nothing and the previous owner I got this from didn't take good care I it , everything was stock before I got it like the cap and rotor is probably from 96 lol the back socks not even attached , one of the rear brake lines is patched, yes I know it's horrible i didn't do it though, so that let's me barley have pressure , but that's the very next thing on my list is to replace the hardline. And the axle fluids have most likely never been checked . I know the front end needs looked at but how would I go about doing that I'm on a budget an I'm trying to avoid the shop for now
#12
::CF Administrator::
This, this, a thousand times this. Make sure you are in peak performing condition before you get stranded.
DON"T!! Not until you find what is making all the noise it could very well spell trouble.
You need to go over your Jeep top to bottom changing all fluids and filters oil/trans/transfer case/both differentials/coolant drain and flush.
Then lube all the zerks and check for any problems with the front end and drive shafts. Once these are done a complete tune-up should be done plugs/wires/rotor and once all those are done take it out on the road and check it out there for any problems before any 4 wheeling.
Now for off road never go alone and make sure you have recovery straps and points on your XJ to pull from if stuck, very important. Be careful till you get used to your Jeep and what it will do "Safely" never overdrive it in the beginning or till you get hurt.
Good luck and enjoy.
You need to go over your Jeep top to bottom changing all fluids and filters oil/trans/transfer case/both differentials/coolant drain and flush.
Then lube all the zerks and check for any problems with the front end and drive shafts. Once these are done a complete tune-up should be done plugs/wires/rotor and once all those are done take it out on the road and check it out there for any problems before any 4 wheeling.
Now for off road never go alone and make sure you have recovery straps and points on your XJ to pull from if stuck, very important. Be careful till you get used to your Jeep and what it will do "Safely" never overdrive it in the beginning or till you get hurt.
Good luck and enjoy.
I know you wanna go hog wild, and mod your rig to make it badass...but do it right once, and you won't have to do it again.
My dual coppers
#13
It's runs great and it creaks and pops on both , think some thing may need greased ? An so basically I would need to get my brake line fixed new brakes and tires an some new shocks and some rust fabrication and I should be good?
#15
CF Veteran
Join Date: Jan 2015
Location: Southern Maryland
Posts: 1,381
Likes: 0
Received 1 Like
on
1 Post
Year: 1991
Model: Cherokee
Engine: 1999 4.0L
If you can get it on a lift, or to a shop, check all the u-joints and ball joints and wheel hubs, those rust away from neglect and they will break on the trail. Grease what you can. Good tune up and replace all the fluids, because you are going to be standing on the pedal trying to get through mud holes and such, and you don't want the engine bogging out at the wrong time or worse breaking something you would have found in routine tune-up. Plugs, cap, rotor, motor oil and filter, air filter, stick your finger in the diff holes and look at fluid, all that.
First piece of add-on gear needs to be a receiver hitch and a recovery strap (not a tow strap) so you can get pulled out of trouble. Second piece of gear should be front recovery points. After that it is whatever you want to do, skids, gears, lockers, lift, whatever. It gets really expensive fast but the basics are cheap and need to be done first.
First piece of add-on gear needs to be a receiver hitch and a recovery strap (not a tow strap) so you can get pulled out of trouble. Second piece of gear should be front recovery points. After that it is whatever you want to do, skids, gears, lockers, lift, whatever. It gets really expensive fast but the basics are cheap and need to be done first.