XJ Taillights..Does anyone know who makes these!!!!!
#17
Senior Member
Joined: Aug 2013
Posts: 556
Likes: 0
From: Henderson, NV
Year: 1996
Model: Cherokee
Engine: 4.0l inline 6 stock
AutoSmart KL-25108C-RK Red 4" Round LED Stop/Turn/Tail Light Kit with Clear Lens by AutoSmart
#18
Thread Starter
Banned
Joined: Nov 2013
Posts: 551
Likes: 0
From: Philadelphia
Year: 1999
Model: Cherokee
Engine: 4.0 high output
AutoSmart KL-25108C-RK Red 4" Round LED Stop/Turn/Tail Light Kit with Clear Lens by AutoSmart Amazon.com: AutoSmart KL-25108C-RK Red 4" Round LED Stop/Turn/Tail Light Kit with Clear Lens: Automotive
#19
Thread Starter
Banned
Joined: Nov 2013
Posts: 551
Likes: 0
From: Philadelphia
Year: 1999
Model: Cherokee
Engine: 4.0 high output
AutoSmart KL-25108C-RK Red 4" Round LED Stop/Turn/Tail Light Kit with Clear Lens by AutoSmart Amazon.com: AutoSmart KL-25108C-RK Red 4" Round LED Stop/Turn/Tail Light Kit with Clear Lens: Automotive
#20
Senior Member
Joined: Aug 2013
Posts: 556
Likes: 0
From: Henderson, NV
Year: 1996
Model: Cherokee
Engine: 4.0l inline 6 stock
Do you think these would work just the same i like the darker looking lens vs the clear lens. i just see that these have holes for screws vs's the clear ones you have do not. Video Link: http://www.amazon.com/AutoSmart-KL-25105C-R-Flush-Mount-Light-Clear/dp/B004HA8YSY/ref=sr_1_1?s=automotive&ie=UTF8&qid=1401568573&sr= 1-1&keywords=autosmart+led+tail+lights
#26
Senior Member
Joined: Aug 2013
Posts: 556
Likes: 0
From: Henderson, NV
Year: 1996
Model: Cherokee
Engine: 4.0l inline 6 stock
So you will have to figure out what wire is what. White was my ground on my rig. (With vehicle off)Connect a tester to ground. Cut your wires on the brake lights. Don't let them touch each other or anything else. One at a time strip then connect it to the tester as well. Turn your lights on and hazards. One wire will make your tester stay solid. One will make it flash.
These are my quick sketches.
These are my quick sketches.
#27
Thread Starter
Banned
Joined: Nov 2013
Posts: 551
Likes: 0
From: Philadelphia
Year: 1999
Model: Cherokee
Engine: 4.0 high output
So you will have to figure out what wire is what. White was my ground on my rig. (With vehicle off)Connect a tester to ground. Cut your wires on the brake lights. Don't let them touch each other or anything else. One at a time strip then connect it to the tester as well. Turn your lights on and hazards. One wire will make your tester stay solid. One will make it flash. These are my quick sketches.
#28
Thread Starter
Banned
Joined: Nov 2013
Posts: 551
Likes: 0
From: Philadelphia
Year: 1999
Model: Cherokee
Engine: 4.0 high output
So you will have to figure out what wire is what. White was my ground on my rig. (With vehicle off)Connect a tester to ground. Cut your wires on the brake lights. Don't let them touch each other or anything else. One at a time strip then connect it to the tester as well. Turn your lights on and hazards. One wire will make your tester stay solid. One will make it flash. These are my quick sketches.
#29
Senior Member
Joined: Aug 2013
Posts: 556
Likes: 0
From: Henderson, NV
Year: 1996
Model: Cherokee
Engine: 4.0l inline 6 stock
I'm not sure what you need the relay and the trailer wiring kit. When you cut off the bulb fixtures all the wiring is right there.
#30
Thread Starter
Banned
Joined: Nov 2013
Posts: 551
Likes: 0
From: Philadelphia
Year: 1999
Model: Cherokee
Engine: 4.0 high output
I do have fast flashers. I like them actually. To get rid of them use a resistor from Autozone that is made for LED lights. Use the instructions on the packaging. I'm not sure what you need the relay and the trailer wiring kit. When you cut off the bulb fixtures all the wiring is right there.