Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Wheels and Tires
- Jeep Grand Cherokee ZJ 1993 to 1998 Tires General Information and Specs
Important information to help you understand your Jeep Grand Cherokee.
Browse all: Wheels and Tires
All Lift & Tire questions go here!!!
Ok so I have a 91 xj that I will be putting a 4.5 x-series lift from RC:
http://www.roughcountry.com/jeep_xj_4x.html
Combined with a 2" spacer/shackle kit.
What I need to know is what other parts should I need to make it all work before I install the lift. All I have is what is in the 4.5 lift and the 2" boost lift. Thanks guys
http://www.roughcountry.com/jeep_xj_4x.html
Combined with a 2" spacer/shackle kit.
What I need to know is what other parts should I need to make it all work before I install the lift. All I have is what is in the 4.5 lift and the 2" boost lift. Thanks guys
Ok so I have a 91 xj that I will be putting a 4.5 x-series lift from RC:
http://www.roughcountry.com/jeep_xj_4x.html
Combined with a 2" spacer/shackle kit.
What I need to know is what other parts should I need to make it all work before I install the lift. All I have is what is in the 4.5 lift and the 2" boost lift. Thanks guys
http://www.roughcountry.com/jeep_xj_4x.html
Combined with a 2" spacer/shackle kit.
What I need to know is what other parts should I need to make it all work before I install the lift. All I have is what is in the 4.5 lift and the 2" boost lift. Thanks guys
Ib4 RC hater krew.
Quick question, I want the re 3.5" super ride lift but I hear that piecing together lifts is cheaper so i was wondering what components ill need other that front coils, leaf packs, adj track bar, and shocks. Thanks
Senior Member
Join Date: Apr 2013
Location: Sin City
Posts: 673
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
So I'm a newb who attempted my lift install today. Discovered that literally all my bolts are rusted hard. I started pb blasting all my bolts to let it soak for a couple days. I may need to torch A few of them as well however some bolts like the upper shock mount are close to the gas tank. Would you guys recommend using a torch up there with no problem?
CF Veteran
Join Date: Aug 2011
Location: San Jose
Posts: 1,994
Likes: 0
Received 7 Likes
on
7 Posts
Year: 89
Model: Cherokee
Engine: 4.0 I6
These will have to be determined after you lift it:
an sye or transfer case drop
Bumpstop
Fenders trimmed to match your tire size
Fender trimming and bumpstopping go hand in hand. You don't have to run as big of bumpstops if you trim, but if you prefer not to trim, you can run larger bumpstops to keep your tires from hitting your fenders. If you don't trim and run bigger bumpstops, your suspension won't articulate as much as it would if you did trim and run a shorter (by comparison) bumpstop.
Newbie
Join Date: Dec 2010
Location: Chico, Ca
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 L
Seeking input
After doing much research through as many forums as I could handle, I would like to get direct feedback on the best project order. I have tried to consolidate my ideas onto one post to get all my questions answered, so I apologize for the length of this post. I currently have a nearly stock 96’ Cherokee sport. As it is easy to dream and over shoot, I may need some more experienced input considering I can afford to “go big.” Since I love this jeep already, I would like to use it daily, but do not want to get carried away.
As is, my thoughts before upgrading tires, you would want to:
Suspension lift – Thinking about 4.5,” would like to run 31”s or 33" without cutting fenders, or at least putting the extended fenders after cutting. I was looking at Rubicon express since someone made the point that they have been at it for a while and have them nailed down pretty good. I want to have something nice for on road use, which seems to lead me to the long arm. I’m also trying to factor in is the added weight from aftermarket bumpers, winch, roof rack, and rocker bars. Does this need to be considered prior to deciding the lift to go with? Also, I’m having a hard time picturing the proper ratio for lift to tires, so I would like to include this common jeep photo as a goal for my jeeps lift and tire ratio, so If you know the specifics I would love to know them.
As I researched lifts, the individual kits were specific to axles. So, I got the impression I should upgrade axles (have Dana 30 front, Dana 35 back) prior to ordering a lift kit and new tires. The ideal seems find a wrecked TJ and scavenge the stock Dana 44 front and rear since they have lockers already, and are beefy enough to upgrade tires for size and torque upgrades. Since that doesn’t seem to be sure fire for finding those, I was wondering about good alternatives for front (?) and rears (ford 8.8). The ideal scenario would be to find axles and be able to do any mods prior to installing them or the lift kit. Any suggestions on locations to purchase axles, whether salvage or company built would be great.
The tires and wheels are currently stock. I would need to know which axles I plan to use so I can match the lug pattern for new rims. I have noticed that the 15in rim is not very popular for new tires in stores, and the 16 or 17 in tire are taking over. Is there a difference for performance that is driving this change? How does the added weight of the rim vs. the reduced weight of the tire affect the overall characteristics of the ride? I had done some research and found that I could do a package setup from tirerack.com for 31x10.5x15r BFG KM2 M/T on some KMC XD series rims. If anyone knows good reason not to do a package like this, I would appreciate the feedback.
These are the first major hurdles in the jeep project, and I don’t want to get off to the wrong start. I appreciate the time taken to read and input on my project,
I thank you all. (Reminder, this is the photo Im including to try to emulate for lift and tires)
As is, my thoughts before upgrading tires, you would want to:
Suspension lift – Thinking about 4.5,” would like to run 31”s or 33" without cutting fenders, or at least putting the extended fenders after cutting. I was looking at Rubicon express since someone made the point that they have been at it for a while and have them nailed down pretty good. I want to have something nice for on road use, which seems to lead me to the long arm. I’m also trying to factor in is the added weight from aftermarket bumpers, winch, roof rack, and rocker bars. Does this need to be considered prior to deciding the lift to go with? Also, I’m having a hard time picturing the proper ratio for lift to tires, so I would like to include this common jeep photo as a goal for my jeeps lift and tire ratio, so If you know the specifics I would love to know them.
As I researched lifts, the individual kits were specific to axles. So, I got the impression I should upgrade axles (have Dana 30 front, Dana 35 back) prior to ordering a lift kit and new tires. The ideal seems find a wrecked TJ and scavenge the stock Dana 44 front and rear since they have lockers already, and are beefy enough to upgrade tires for size and torque upgrades. Since that doesn’t seem to be sure fire for finding those, I was wondering about good alternatives for front (?) and rears (ford 8.8). The ideal scenario would be to find axles and be able to do any mods prior to installing them or the lift kit. Any suggestions on locations to purchase axles, whether salvage or company built would be great.
The tires and wheels are currently stock. I would need to know which axles I plan to use so I can match the lug pattern for new rims. I have noticed that the 15in rim is not very popular for new tires in stores, and the 16 or 17 in tire are taking over. Is there a difference for performance that is driving this change? How does the added weight of the rim vs. the reduced weight of the tire affect the overall characteristics of the ride? I had done some research and found that I could do a package setup from tirerack.com for 31x10.5x15r BFG KM2 M/T on some KMC XD series rims. If anyone knows good reason not to do a package like this, I would appreciate the feedback.
These are the first major hurdles in the jeep project, and I don’t want to get off to the wrong start. I appreciate the time taken to read and input on my project,
I thank you all. (Reminder, this is the photo Im including to try to emulate for lift and tires)
CF Veteran
Join Date: Dec 2011
Location: Roanoke, VA
Posts: 1,050
Likes: 0
Received 2 Likes
on
1 Post
Year: 1990
Model: Cherokee
Engine: 4.0
After doing much research through as many forums as I could handle, I would like to get direct feedback on the best project order. I have tried to consolidate my ideas onto one post to get all my questions answered, so I apologize for the length of this post. I currently have a nearly stock 96 Cherokee sport. As it is easy to dream and over shoot, I may need some more experienced input considering I can afford to go big. Since I love this jeep already, I would like to use it daily, but do not want to get carried away.
As is, my thoughts before upgrading tires, you would want to:
Suspension lift Thinking about 4.5, would like to run 31s or 33" without cutting fenders, or at least putting the extended fenders after cutting. I was looking at Rubicon express since someone made the point that they have been at it for a while and have them nailed down pretty good. I want to have something nice for on road use, which seems to lead me to the long arm. Im also trying to factor in is the added weight from aftermarket bumpers, winch, roof rack, and rocker bars. Does this need to be considered prior to deciding the lift to go with? Also, Im having a hard time picturing the proper ratio for lift to tires, so I would like to include this common jeep photo as a goal for my jeeps lift and tire ratio, so If you know the specifics I would love to know them.
As I researched lifts, the individual kits were specific to axles. So, I got the impression I should upgrade axles (have Dana 30 front, Dana 35 back) prior to ordering a lift kit and new tires. The ideal seems find a wrecked TJ and scavenge the stock Dana 44 front and rear since they have lockers already, and are beefy enough to upgrade tires for size and torque upgrades. Since that doesnt seem to be sure fire for finding those, I was wondering about good alternatives for front (?) and rears (ford 8.8). The ideal scenario would be to find axles and be able to do any mods prior to installing them or the lift kit. Any suggestions on locations to purchase axles, whether salvage or company built would be great.
The tires and wheels are currently stock. I would need to know which axles I plan to use so I can match the lug pattern for new rims. I have noticed that the 15in rim is not very popular for new tires in stores, and the 16 or 17 in tire are taking over. Is there a difference for performance that is driving this change? How does the added weight of the rim vs. the reduced weight of the tire affect the overall characteristics of the ride? I had done some research and found that I could do a package setup from tirerack.com for 31x10.5x15r BFG KM2 M/T on some KMC XD series rims. If anyone knows good reason not to do a package like this, I would appreciate the feedback.
These are the first major hurdles in the jeep project, and I dont want to get off to the wrong start. I appreciate the time taken to read and input on my project,
I thank you all. (Reminder, this is the photo Im including to try to emulate for lift and tires)
As is, my thoughts before upgrading tires, you would want to:
Suspension lift Thinking about 4.5, would like to run 31s or 33" without cutting fenders, or at least putting the extended fenders after cutting. I was looking at Rubicon express since someone made the point that they have been at it for a while and have them nailed down pretty good. I want to have something nice for on road use, which seems to lead me to the long arm. Im also trying to factor in is the added weight from aftermarket bumpers, winch, roof rack, and rocker bars. Does this need to be considered prior to deciding the lift to go with? Also, Im having a hard time picturing the proper ratio for lift to tires, so I would like to include this common jeep photo as a goal for my jeeps lift and tire ratio, so If you know the specifics I would love to know them.
As I researched lifts, the individual kits were specific to axles. So, I got the impression I should upgrade axles (have Dana 30 front, Dana 35 back) prior to ordering a lift kit and new tires. The ideal seems find a wrecked TJ and scavenge the stock Dana 44 front and rear since they have lockers already, and are beefy enough to upgrade tires for size and torque upgrades. Since that doesnt seem to be sure fire for finding those, I was wondering about good alternatives for front (?) and rears (ford 8.8). The ideal scenario would be to find axles and be able to do any mods prior to installing them or the lift kit. Any suggestions on locations to purchase axles, whether salvage or company built would be great.
The tires and wheels are currently stock. I would need to know which axles I plan to use so I can match the lug pattern for new rims. I have noticed that the 15in rim is not very popular for new tires in stores, and the 16 or 17 in tire are taking over. Is there a difference for performance that is driving this change? How does the added weight of the rim vs. the reduced weight of the tire affect the overall characteristics of the ride? I had done some research and found that I could do a package setup from tirerack.com for 31x10.5x15r BFG KM2 M/T on some KMC XD series rims. If anyone knows good reason not to do a package like this, I would appreciate the feedback.
These are the first major hurdles in the jeep project, and I dont want to get off to the wrong start. I appreciate the time taken to read and input on my project,
I thank you all. (Reminder, this is the photo Im including to try to emulate for lift and tires)
CF Veteran
Join Date: Aug 2011
Location: San Jose
Posts: 1,994
Likes: 0
Received 7 Likes
on
7 Posts
Year: 89
Model: Cherokee
Engine: 4.0 I6
Jk dana 44 is basically a 30 in a new housing. You can go quite simple and strong with a 29 spline 8.25 with chromos for 33s. Or search the junkyards for a late 80's xj with a dana 44 and go chromos with that. Those should last you a good while as a weekend warrior. Plus they're direct bolt on. Your 30 should be fine, but consider getting some stronger shafts and u-joints. (I think yours already has the 760 u-joints but I can't recall). If there's one thing you should definitely go big with, its shocks. Having correct suspension geometry will only improve your ride and articulation so much, you'll need a good set of shocks to go the extra mile and be smooth on the road. A lot of people here love and reccommend bilstein 5100's.
Speaking of articulation, you'll probably want to go with a smaller leaf pack, and a longer shackle. It will ride better. Also look into shackle relocators so you can get the most out of your leafs (I hear they're pretty easy to make too if you've got the time and resources)
Speaking of articulation, you'll probably want to go with a smaller leaf pack, and a longer shackle. It will ride better. Also look into shackle relocators so you can get the most out of your leafs (I hear they're pretty easy to make too if you've got the time and resources)
CF Veteran
Join Date: Nov 2011
Location: SLC, Utah
Posts: 3,603
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L
Jk dana 44 is basically a 30 in a new housing. You can go quite simple and strong with a 29 spline 8.25 with chromos for 33s. Or search the junkyards for a late 80's xj with a dana 44 and go chromos with that. Those should last you a good while as a weekend warrior. Plus they're direct bolt on. Your 30 should be fine, but consider getting some stronger shafts and u-joints. (I think yours already has the 760 u-joints but I can't recall). If there's one thing you should definitely go big with, its shocks. Having correct suspension geometry will only improve your ride and articulation so much, you'll need a good set of shocks to go the extra mile and be smooth on the road. A lot of people here love and reccommend bilstein 5100's.
Speaking of articulation, you'll probably want to go with a smaller leaf pack, and a longer shackle. It will ride better. Also look into shackle relocators so you can get the most out of your leafs (I hear they're pretty easy to make too if you've got the time and resources)
Speaking of articulation, you'll probably want to go with a smaller leaf pack, and a longer shackle. It will ride better. Also look into shackle relocators so you can get the most out of your leafs (I hear they're pretty easy to make too if you've got the time and resources)
CF Veteran
Join Date: Aug 2011
Location: San Jose
Posts: 1,994
Likes: 0
Received 7 Likes
on
7 Posts
Year: 89
Model: Cherokee
Engine: 4.0 I6
CF Veteran
Join Date: Apr 2011
Location: Carrollton, GA
Posts: 14,553
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
CF Veteran
Join Date: Aug 2011
Location: San Jose
Posts: 1,994
Likes: 0
Received 7 Likes
on
7 Posts
Year: 89
Model: Cherokee
Engine: 4.0 I6
Seasoned Member
Join Date: Mar 2011
Location: battleground wa
Posts: 328
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 ho
Being that he has a 96 shouldn't he have a hp 30? Throw some shafts into it and i always thought they were almost as strong as the 44 front???
I ask because I am planning to utilize mine instead of swapping the front out.
I ask because I am planning to utilize mine instead of swapping the front out.
Moderator of Jeeps
Join Date: Jul 2011
Location: Frederick, MD from Cleveland, OH
Posts: 21,029
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1993 YJ Wrangler
Engine: 4.0 I6
'96 is a HP30, and it has the upgraded ujoints that began in '95.
Seasoned Member
Join Date: Mar 2011
Location: battleground wa
Posts: 328
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 ho