Modified XJ Cherokee Tech XJ (84-01)
All modified tech questions. If it modifies your XJ beyond stock parts ask it here.
Sponsored by:
Sponsored by:
Old 09-21-2015, 02:17 PM
How-Tos on this Topic
Last edit by: IB Advertising
See related guides and technical advice from our community experts:

Browse all: Wheels and Tires
Print Wikipost

All Lift & Tire questions go here!!!

Thread Tools
 
Search this Thread
 
Old 06-03-2011, 07:29 AM
  #2776  
Member
 
lighttoast's Avatar
 
Join Date: May 2011
Location: Tobaccoville, NC
Posts: 141
Likes: 0
Received 0 Likes on 0 Posts
Year: 1997/2014
Model: Cherokee
Engine: 4.0L I6/3.2 V6
Default

Originally Posted by Kyle 4x4 4life
What it pretty much boils down to is your wheels/tires will stick out around 2 inches more than stock...they would be plenty fine to run 31x10.5's...but just a heads up, 3.31" backspacing is a quite a bit and will make your tires stick out real wide...look at the photo's of my jeep, im running 3.5" backspacing and half of my tire sticks outside the stock fender flares...you'd be best to probably go with 4-4.5" backspacing...unless you plan on going with a wider/bigger tire in the future.
Your wheels are significantly wider than the ones I'm looking at. do you think I'd still get that wide stance look with the skinnier wheels? out of curiosity, how much clearance do you have on the inside with the 3.5 BS? Also, your wheels are wider than the width of your tire, or at least the numbers say so. it looks good with the tire mounted. the 31x10.5 tire is 2.5" wider than the wheels i'm looking at. that would suggest more bulge from the wheel right? which could cause rubbing inside.

Sorry, i'm pretty new at this and a little paranoid about spending so much before knowing that everything will fit. I had a few unexpected problems with the lift, but was able to work through them. theres not a whole lot I can do about the tire rubbing on the inside though.

thanks for the help
Old 06-03-2011, 11:37 AM
  #2777  
CF Veteran
 
Nperryman's Avatar
 
Join Date: Dec 2010
Location: Missouri
Posts: 1,246
Likes: 0
Received 1 Like on 1 Post
Year: 1998
Model: Cherokee
Engine: I6 4.0 L
Default

I need some wheels for 245/75/16 tires. They will be all terrains most likely, rarely see offroad. I'm looking for some black rims with around 4-4.5" backspacing. Should I use 16*7 or 16*8? Also does anyone know of any wheels for less than 65$? I know cragar has some for bout 75$ a piece...... I also currently have four jeep canyon wheels with nothing wrong with them. How much could I get out of them? I see them on ebay for over 100 each buy it now.
Thanks guys.
Old 06-03-2011, 01:43 PM
  #2778  
Senior Member
 
XJmotard's Avatar
 
Join Date: Feb 2011
Location: havelock, nc
Posts: 921
Likes: 0
Received 1 Like on 1 Post
Year: 1996
Model: Cherokee
Engine: 4.0 HO
Default

Originally Posted by White Elephant

you're the bomb on this thread. you're helpin me out a lot thanks. I'm having some concerns about the add a leaf. a lot of people are saying it starts to sag pretty quick.

would it make a difference if I got the add a leaf lift then when I got the money I get new leafs, or should I save up and get new leafs and add a leaf at once?
Or do a Bastard pack off a spring under axle vehicle...like a Dakota...(very popular)...very cheap and very good budget boost...then just pick and play with what how many and what leafs u want to reach desired height
Old 06-03-2011, 01:44 PM
  #2779  
Senior Member
 
XJmotard's Avatar
 
Join Date: Feb 2011
Location: havelock, nc
Posts: 921
Likes: 0
Received 1 Like on 1 Post
Year: 1996
Model: Cherokee
Engine: 4.0 HO
Default

But yes over time the aal will start to sag...
Old 06-03-2011, 04:21 PM
  #2780  
Seasoned Member
 
White Elephant's Avatar
 
Join Date: May 2011
Location: Placentia, CA
Posts: 311
Likes: 0
Received 0 Likes on 0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0 L
Default

then I'll just get new ones haha
Old 06-03-2011, 06:02 PM
  #2781  
Newbie
 
BlackBearXJ's Avatar
 
Join Date: May 2011
Location: North Carolina
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
Default

Hey I have a 6.5 lift on a '98 XJ Sport, but the rear is sagging a little..So, I am going to get a whole new set of leaf packs, but I was wondering if someone could tell me what size leaf packs i need to revive the rear of my jeep...

Some info to go by is the rear shackles are 6 1/8" from bolt center to bolt center, and I do not have leaf blocks...

I do not know what size stock shackles are, so I'm just wondering do I need 4.5", 5.5", or 6.5" leaf packs?

Any help is greatly appreciated, cause I'm not diggin the Jeep squat...
Old 06-04-2011, 04:45 PM
  #2782  
Newbie
 
Hoovw's Avatar
 
Join Date: Jan 2011
Location: Bowling Green, OH
Posts: 20
Likes: 0
Received 0 Likes on 0 Posts
Year: 2000
Model: Cherokee
Default

Originally Posted by Hoovw
I have 235/70/16's on there now I believe. Is that all the more I can push it?
bump
Old 06-04-2011, 05:18 PM
  #2783  
CF Veteran
 
Kyle 4x4 4life's Avatar
 
Join Date: Feb 2011
Location: South Dakota
Posts: 1,838
Likes: 0
Received 1 Like on 1 Post
Year: 1992
Model: Cherokee
Engine: 4.0
Default

Originally Posted by lighttoast
Your wheels are significantly wider than the ones I'm looking at. do you think I'd still get that wide stance look with the skinnier wheels? out of curiosity, how much clearance do you have on the inside with the 3.5 BS? Also, your wheels are wider than the width of your tire, or at least the numbers say so. it looks good with the tire mounted. the 31x10.5 tire is 2.5" wider than the wheels i'm looking at. that would suggest more bulge from the wheel right? which could cause rubbing inside.

Sorry, i'm pretty new at this and a little paranoid about spending so much before knowing that everything will fit. I had a few unexpected problems with the lift, but was able to work through them. theres not a whole lot I can do about the tire rubbing on the inside though.

thanks for the help
The width of the wheel doesn't change the stance at all, it just changes how the dish of it...or the offset...the backspacing is what determines whether they will sit out wide or sit in narrow...the backspacing is the measurement on the back side of the wheel where it bolts up, to the outside edge of the wheel...therefore the less the number the further it'll stick out...and yes my wheels are wider than my tires which is definatly not suggested, but they where on when i bought it and didn't see the need in wasting money on new ones...also 8" wide wheels are perfectly fine for 31x10.5's.
Old 06-05-2011, 12:51 AM
  #2784  
Junior Member
 
Irhall93's Avatar
 
Join Date: Mar 2011
Location: Wisconsin
Posts: 66
Likes: 0
Received 0 Likes on 0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0 I6
Default

Originally Posted by havensov
HavenSOV's Bertha. '91 Laredo


Is there any chance you stripped down this ^ jeep to stock and sold it? I have one almost identical minus ad ons and mine little more worn. Im in Wisconsin, bought it in Chicago, terrain in background could be near here. Just caught me off guard thats all.
Old 06-05-2011, 05:42 PM
  #2785  
Junior Member
 
99Cherokeef's Avatar
 
Join Date: Jan 2011
Location: Tigard, OR
Posts: 41
Likes: 0
Received 0 Likes on 0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L I6 High Output
Default

I have 31" Treadwright AT/KO clones ordered and Im looking to lift my jeep. I have spacers in the front and I noticed some pieces of plastic between a few of the rear leaves. Right now im sitting at about 18.5-19" from hub to fender.

Originally I was going to get the 3" RC with leaf packs and control arms, but I thought this might be cheaper and I can maintain a nice ride after I fix my shackle angle.

Shackle relocation - supposed to net ~1inch and maybe a longer shackle

V8 zj upcountry coils along with the coil spacers from the PO ~2.5-3inches

Shocks-idk what to get, but this is an area I dont want to skimp. Any suggestions?

Adjustable track bar or maybe redrill the mount?

Quick discos

WJ control arms or RC 3" control arms?

So any help on this would be greatly appreciated. Im hoping to be about 3" over stock.
Old 06-05-2011, 06:25 PM
  #2786  
CF Veteran
 
1plunk's Avatar
 
Join Date: Feb 2011
Location: Apple Valley, MN
Posts: 2,763
Likes: 0
Received 0 Likes on 0 Posts
Year: 1999
Model: Cherokee (XJ)
Engine: 4.0L
Default

You can buy just shocks from almost anywhere, but there's a guy who can get you a deal from Zone Offroad, i'll post the link in a sec

Here ya go

https://www.cherokeeforum.com/f10/zo...pension-81692/

Last edited by 1plunk; 06-05-2011 at 06:27 PM.
Old 06-05-2011, 07:49 PM
  #2787  
CF Veteran
 
Nperryman's Avatar
 
Join Date: Dec 2010
Location: Missouri
Posts: 1,246
Likes: 0
Received 1 Like on 1 Post
Year: 1998
Model: Cherokee
Engine: I6 4.0 L
Default

Is it true that bf goodrich all terrain has one of the best fuel economy ratings?
Old 06-07-2011, 11:25 AM
  #2788  
Seasoned Member
 
White Elephant's Avatar
 
Join Date: May 2011
Location: Placentia, CA
Posts: 311
Likes: 0
Received 0 Likes on 0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0 L
Default

I've got a 2" lift kit coming in thursday. Spacers, add-a-leaf, plus shocks.

I want to put them on myself (with help from a friend) but don't really have a clue how to do it.

any suggestions?
Old 06-07-2011, 01:04 PM
  #2789  
Seasoned Member
 
stryker1228's Avatar
 
Join Date: Mar 2011
Location: Powhatan, VA
Posts: 491
Likes: 0
Received 0 Likes on 0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0 I6
Default

Originally Posted by White Elephant
I've got a 2" lift kit coming in thursday. Spacers, add-a-leaf, plus shocks.

I want to put them on myself (with help from a friend) but don't really have a clue how to do it.

any suggestions?
Google or youtube it. There are plenty of write ups about it.
Old 06-07-2011, 06:24 PM
  #2790  
Member
 
Grasshoppa's Avatar
 
Join Date: May 2010
Location: Milton, Fl
Posts: 119
Likes: 0
Received 0 Likes on 0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L High Output
Default

got a tire question...honestly i skipped alot of pages so i have no clue if this was asked but i have 31 goodyear wranger mtrs up front and they rub on my control arms up front at full turn. to pass UK inspection, i cant have these rub. i was going to order wheel spacers just for this inspection. what size spacer should i order so these wont rub. i have stock suspension on. thanks


Quick Reply: All Lift & Tire questions go here!!!



All times are GMT -5. The time now is 06:27 PM.