1plunk

The add a leaf only works for so long, and then you're back where u started in a few months (this is what I hear because I avoid them for these reasons, but I can't verify)

96xjclassic

What if I add a 2'' lift block? That wont sag and I will still utilize stock ride.

1plunk

I'm not sure how that would affect your leafs if they are already toast, but mist people here avoid them like the plague

96xjclassic

Bastard pack it is!

1plunk

Lol I hear very good things about them if done right, I had a link to a good write up but I lost it when I reset my phone...

96xjclassic

Someone will post something. Thanks for the help though.

1plunk

No problem, anything for a fellow XJer

cdawall

never sagged when i had one on my ranger. running a bastard pack on the jeep. plenty of guys run them on here without an issue. by only lasting for so long all leafs only last so long.

1plunk

I meanings u already had crap leafs, and then tried the AAL

cdawall

thedale on here is running the original leafs with 250K on them and a 2" aal and a shackle and its still sits at about 3.5-4" they still work. my pickups leafs were pretty shot from being loaded down and the AAL still gave the full 2" lift even with a set of (stock) 2.5" blocks sitting under them

mobius1

I have a 97 jeep country. 4.0 straight six. Has a good knock in the engine. 20-50 oil quiets it down 75% oil pressure is between 35-40 and while driving over 1500 rpm you cant hear it at all. are the valves adjustable, even a little. forgive me if I posted this on the wrong site.

Kyle 4x4 4life

Right site...wrong thread.lol This more falls under the "Ask the question thread" Heres the link...https://www.cherokeeforum.com/f2/ask...-thread-45772/

NorCalJeep

anyone know where I can get some cheap leaf packs?

Gatchmo5710

any 2.5 inch wide leafs of trucks will work to make a bastard pack. most use s10 leafs. news leafs arent too cheap. look at quadratec

troy fritz

Good choice. I've been running mine for 2 years now and still love em.