Synyster

Thanks for the reply guys.

So with 15x8 and 4"Bs should I go with 30x9.5 or 30x10.

Nickell586

If you don't mind them sticking out a bit you can go 10.5 wide and 3.75 bs. That's where I started. Looks good. But I like the wider stance

Jared W

Hey I have 1.5" shackles. Is there any inexpensive decent 2-3" ones out there? Because im having a slight clearance issure in the rear when im only doing serious flexing, its nothing major but I havent had to cut on the rear and Im not trying to now. If you got any info for a cheap alternative I would appreciate it. Thanks

Nickell586

Extended bumpstops

Jared W

That is 1 thing i have not done

Nickell586

Most people seem to forget. Until you start cutting tires. That's how I learned lol

bheath

yup. first time you inspect your tires and see your brand new set of rubbers mangled and cut up you'll find a fix. soon.

dukie564

x2...everyone always forgets how important this is...

Nickell586

Yeah most people just try to add more lift. When the majority of the time you just need to bumpstop.

CherokeeShrop91

hey guys, i was wondering, i have a cherokee with a 4.5 inch lift, and was wondering if i decided to put 35'' tires on it, if thats even a practical idea, most people iv talked to so far have said not to go any bigger then a 33's, because of gearing and rubbing and whatnot, but if anyone has done this, could ya help me out, what amount of offset would be needed for it to work, trimming, all that. thanks-

NewKindOfClown

You've got 33s. Look at another inch all the way around, and consider what issues it might cause. A 2" larger tire will give you an inch of height. 35s are pushing it with stock gearing and axles. Some people say it's no problem; others say don't do it. I'm not sure what trimming you'd need cause I'm still stock with passenger tires but I'm already trimmed. Make sure you bumpstop properly and have wheels with good backspacing, and you shouldn't have any trouble with rubbing.

Nitrospaz9

Ever since I added my 2 inch left my 4 wheel drive has been crazy. It won't come out of 4x4 and when it is in 4x4 it feels like its in low. Any idea?

Nickell586

Check your linkage on your t case

Nickell586

Anyone run nitto mud grapplers? I seem to have more rubbing issues than I did before. Not sure if its the big lugs on the side or what. Just curious if anyone else has had any issues

Jared W

Yea Im runnin 33 12.50 r17 and when you cut it all the way they will rub a lil, but the thing is when i got my 33s they actually measured around 34.