Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Wheels and Tires
- Jeep Grand Cherokee ZJ 1993 to 1998 Tires General Information and Specs
Important information to help you understand your Jeep Grand Cherokee.
Browse all: Wheels and Tires
All Lift & Tire questions go here!!!
#7456
CF Veteran
Join Date: Jul 2011
Location: Warren, Pa
Posts: 2,164
Likes: 0
Received 1 Like
on
1 Post
Year: 97
Model: Cherokee
Engine: 4.0L
Originally Posted by cattfish420
Hey Guys, I just got a 2001 Cherokee Sport it's all stock just like from the dealer. it's only 2 wheel drive but I was thinking about lifting it up a little to make the stance look a little better. I did take it out on some trails and through the mud runs great never got stuck once. Any suggestions on what I could do to lift it for cheep. THANKS.
#7457
CF Veteran
Join Date: Jul 2011
Location: Warren, Pa
Posts: 2,164
Likes: 0
Received 1 Like
on
1 Post
Year: 97
Model: Cherokee
Engine: 4.0L
Originally Posted by Outlaw Star
A budget boost with some 30x9.50s should be plenty for ya. Try Rubicon Express, they have a 2 inch BB complete with shocks. And Welcome to the forum!
#7458
::CF Administrator::
Join Date: Sep 2010
Location: Lantana, Fl
Posts: 34,042
Received 236 Likes
on
188 Posts
Year: 1996
Model: Cherokee (XJ)
Engine: 4.Slow
Originally Posted by BNJeepsta
Beat me to it!! I had the RE 2" for a little while and loved it except for I had the one with the blocks. Blocks=Crap but they offer the same bb with an AAL I believe
#7459
Member
Join Date: Jun 2010
Location: Soddy Daisy, TN
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L
Originally Posted by myslo50
my rear wheels are not center in the wheel well. i know the right rear end cap slides around cause i blew it off when i got stuck, but the left rear, all plastics are tight.
Long story short got new leafs and problem is fixed.
Your leafs should measure 23 1/2 center pin to front eye and 25 or 27 to the rear. Ill double check for you tomorrow though.
#7460
Junior Member
Join Date: Apr 2012
Location: Kokomo, IN
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0L 242cid I6 high output
hey fellas, i got my 94 and i am wanting 2 do a 2" or 3" budget lift but im afraid my leaf springs r sagged and i was reading that if i use lift shackles that it can (or will) cause axle wrap and i dont want that to happen i like my jeep mobile i also have a 2 wheel drive XJ. so heres my question...
1. how sagged does ones leafs have to be to cause axle wrap?
2. can i use the rear leafs on my 93(the 4x2) to make a bastard pack for my 94?
1. how sagged does ones leafs have to be to cause axle wrap?
2. can i use the rear leafs on my 93(the 4x2) to make a bastard pack for my 94?
#7461
Member
Join Date: Sep 2011
Location: Raleigh, NC
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Seriously guys, I don't know why people keep telling people to get 4 inch bs with 2 or 3 inch lifts. Stick with the stock wheels UNLESS you want to cut your fenders. If you get 4 inch bs without trimming then you're gonna rub and probably lose your flares on the first big bump you hit. You will rub with any after market wheel backspacing.
#7462
CF Veteran
Join Date: Jul 2011
Location: Warren, Pa
Posts: 2,164
Likes: 0
Received 1 Like
on
1 Post
Year: 97
Model: Cherokee
Engine: 4.0L
Originally Posted by rayray0918
Seriously guys, I don't know why people keep telling people to get 4 inch bs with 2 or 3 inch lifts. Stick with the stock wheels UNLESS you want to cut your fenders. If you get 4 inch bs without trimming then you're gonna rub and probably lose your flares on the first big bump you hit. You will rub with any after market wheel backspacing.
Well I guess this must be some sort of futuristic space man ride bc its a 3" with 31's on 4" bs soft 8's. No trimming, no sway bars, and absolutely no rubbing. But what the hell do I know? I only drive it
#7464
Newbie
Join Date: May 2012
Location: Texas
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
#7465
CF Veteran
Join Date: Dec 2010
Location: Missouri
Posts: 1,246
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
Engine: I6 4.0 L
Do we get a discount through rough country for being a forum member? I know there is a vendor on here but he hasn't replied to my message and I'm wanting to get my new shocks and control arms soon
#7466
CF Veteran
Join Date: Jul 2011
Location: Warren, Pa
Posts: 2,164
Likes: 0
Received 1 Like
on
1 Post
Year: 97
Model: Cherokee
Engine: 4.0L
Originally Posted by Nperryman
Do we get a discount through rough country for being a forum member? I know there is a vendor on here but he hasn't replied to my message and I'm wanting to get my new shocks and control arms soon
#7467
Seasoned Member
Join Date: Jun 2011
Location: Cali
Posts: 334
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0 L
33x10.5x15 on Stock XJ Rims?
Has any one run 33x10.5x15 on stock 15X7 rims and if so did you run wheel spacers? If you have pics post them. I am planning on going to 33" soon but right now I am running 31" BFG KM2s on Soft 8s with a 3.5/4" DPG Old Man Emu lift (LOVE THE LIFT!). I want to de-evolve and go back to the stock 5 spoke ally rims to get a little less fender rubbing at full flex.
#7468
CF Veteran
Join Date: Dec 2010
Location: Missouri
Posts: 1,246
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
Engine: I6 4.0 L
Originally Posted by thebe001
Has any one run 33x10.5x15 on stock 15X7 rims and if so did you run wheel spacers? If you have pics post them. I am planning on going to 33" soon but right now I am running 31" BFG KM2s on Soft 8s with a 3.5/4" DPG Old Man Emu lift (LOVE THE LIFT!). I want to de-evolve and go back to the stock 5 spoke ally rims to get a little less fender rubbing at full flex.
#7469
CF Veteran
Join Date: Jul 2011
Location: JOCO
Posts: 4,521
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Engine: 4.0 Inline 6
Originally Posted by thebe001
Has any one run 33x10.5x15 on stock 15X7 rims and if so did you run wheel spacers? If you have pics post them. I am planning on going to 33" soon but right now I am running 31" BFG KM2s on Soft 8s with a 3.5/4" DPG Old Man Emu lift (LOVE THE LIFT!). I want to de-evolve and go back to the stock 5 spoke ally rims to get a little less fender rubbing at full flex.
#7470
Member
Join Date: Jun 2010
Location: Soddy Daisy, TN
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L
Originally Posted by bheath
There is a thread on here thats is only for pics of lifts and tire setups. Check it out. And you'll probably need spacers. I did anyways.