Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Wheels and Tires
- Jeep Grand Cherokee ZJ 1993 to 1998 Tires General Information and Specs
Important information to help you understand your Jeep Grand Cherokee.
Browse all: Wheels and Tires
All Lift & Tire questions go here!!!
#9437
CF Veteran
Join Date: Sep 2011
Location: Frederick, MD
Posts: 10,447
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
Originally Posted by lowrange2
Those will fit your wheels fine. At 3"s of lift you may have to trim a bit to make those fit.
#9441
CF Veteran
Join Date: Sep 2011
Location: Frederick, MD
Posts: 10,447
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
Originally Posted by lowrange2
32s
I run 31's on 3"s of lift and only had to trim a smidge off of the very bottom corners of the flares.
I run 31's on 3"s of lift and only had to trim a smidge off of the very bottom corners of the flares.
#9442
CF Veteran
Join Date: Apr 2011
Location: Clayton, NC
Posts: 1,146
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.6L I6 Stroker with port matched +99 intake and 62mm TB
Click (and bookmark) the link below and do the conversion.
http://www.dakota-truck.net/tirecalc/tirecalc.html
In short, yes. 255/75R/16's are 31 x 10.04 x 16's.
http://www.dakota-truck.net/tirecalc/tirecalc.html
In short, yes. 255/75R/16's are 31 x 10.04 x 16's.
#9445
Junior Member
I didn't do the write-up but I did it the same way.
http://www.naxja.org/forum/showthread.php?t=1027064
You have to make a pattern and drill holes.
http://www.naxja.org/forum/showthread.php?t=1027064
You have to make a pattern and drill holes.
#9446
CF Veteran
Join Date: Apr 2011
Location: Carrollton, GA
Posts: 14,553
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
I didn't do the write-up but I did it the same way.
http://www.naxja.org/forum/showthread.php?t=1027064
You have to make a pattern and drill holes.
http://www.naxja.org/forum/showthread.php?t=1027064
You have to make a pattern and drill holes.
#9450
CF Veteran
Join Date: Nov 2010
Location: some small town oregon
Posts: 15,581
Likes: 0
Received 8 Likes
on
8 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
Originally Posted by Rearwardassist
In anyones opinion is the value of the rubicon express lift worth the additional money versus the rough country in the 3-3.5 lift range.
So you can guess what my opinion is lol