09-21-2015, 02:17 PM
Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Wheels and Tires
- Jeep Grand Cherokee ZJ 1993 to 1998 Tires General Information and Specs
Important information to help you understand your Jeep Grand Cherokee.
Browse all: Wheels and Tires
All Lift & Tire questions go here!!!
10-25-2012, 07:52 PM
CF Veteran
Join Date: Jul 2011
Location: Warren, Pa
Posts: 2,164
Likes: 0
Received 1 Like
on
1 Post
Year: 97
Model: Cherokee
Engine: 4.0L
Originally Posted by 1976Mustang
Recommended pressure for 31/10.5 tires on stock rims? Store who installed them set it to 40, max is 50.
10-25-2012, 07:54 PM
Member
Join Date: Oct 2012
Location: Poulsbo, Wa
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0 HO
The right combination...
If I put on a 2'' lift trim my fenders and put on a set of spacers could I put on 31's and not rub very much?
10-25-2012, 07:56 PM
CF Veteran
Join Date: Jul 2011
Location: Warren, Pa
Posts: 2,164
Likes: 0
Received 1 Like
on
1 Post
Year: 97
Model: Cherokee
Engine: 4.0L
Originally Posted by Bullstang360
If I put on a 2'' lift trim my fenders and put on a set of spacers could I put on 31's and not rub very much?
10-25-2012, 07:59 PM
CF Veteran
Join Date: Sep 2011
Location: Frederick, MD
Posts: 10,447
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
Originally Posted by Bullstang360
If I put on a 2'' lift trim my fenders and put on a set of spacers could I put on 31's and not rub very much?
10-25-2012, 08:09 PM
Member
Join Date: Oct 2012
Location: Poulsbo, Wa
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0 HO
10-25-2012, 08:13 PM
Member
Join Date: Oct 2012
Location: Poulsbo, Wa
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0 HO
10-25-2012, 08:15 PM
CF Veteran
Join Date: May 2012
Location: Colorado
Posts: 3,242
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1992 Cherokee Sport
Engine: Bone-Stock 242
Dunno, i was hoping someone else would add on... Anyways i have the same issue with 31/10.5's rubbing on the control arm. I just deal with it and try not to turn hard.
10-25-2012, 08:16 PM
Senior Member
Join Date: Aug 2012
Posts: 792
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Bullstang360
What kind of money are we talking? and got any suggestions?
Last edited by greenxj21; 10-25-2012 at 08:20 PM.
10-25-2012, 08:24 PM
Member
Join Date: Oct 2012
Location: Poulsbo, Wa
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0 HO
For cheap, look at cragar soft 8s or v-5s 15x7 5x4.5 bolt pattern and either 3.75 or 4.0 backspacing. They are $50 a piece http://www.jegs.com/i/Cragar/260/365-5712/10002/-1 3.75 sticks out further than the 4" backspacing. Hope this answers some questions.
10-25-2012, 08:29 PM
Moderator of Jeeps
Join Date: Jul 2011
Location: Frederick, MD from Cleveland, OH
Posts: 21,029
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Spacers add a possible failure point, and they require maintenance/checks. Wheels are wheels.
10-25-2012, 08:35 PM
Member
Join Date: Oct 2012
Location: Poulsbo, Wa
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0 HO
For cheap, look at cragar soft 8s or v-5s 15x7 5x4.5 bolt pattern and either 3.75 or 4.0 backspacing. They are $50 a piece http://www.jegs.com/i/Cragar/260/365-5712/10002/-1 3.75 sticks out further than the 4" backspacing. Hope this answers some questions.
10-25-2012, 08:37 PM
CF Veteran
Join Date: Apr 2011
Location: Chickamauga Ga.
Posts: 3,493
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
Originally Posted by Bullstang360
What is the back spacing on the stock wheels so i can figure out what I will actually gain by going that route? I have a stock 1991 Cherokee Sport.