all muffler and exhaust questions go here!!!!!!
#376
CF Veteran
Join Date: Sep 2010
Location: Milwaukee, WI
Posts: 21,168
Likes: 0
Received 5 Likes
on
5 Posts
Year: 1987
Engine: Check
Oh, no, I read your post and understood completely.
I read 'piped all the way back' and wanted to make sure EVERYONE understood.
Do not argue with a Moderator, for future reference.
I could have issued warning infractions, if you want I still can. Again, I do t want to hear any argument.
I read 'piped all the way back' and wanted to make sure EVERYONE understood.
Do not argue with a Moderator, for future reference.
I could have issued warning infractions, if you want I still can. Again, I do t want to hear any argument.
#377
Member
Join Date: Aug 2010
Location: Trenton, MI
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0 I6
I'm not arguing with you your taking my post the wrong way. By piped all the way back I meant that it is not cut off at the muffler or dumped at the axle but has piping traveling to the rear of the vehicle exiting at the stock location. I have a cat and would not remove it it sounds like crap with no cat and i don't want a catless exhaust. I can understand where we were both misunderstanding.
#378
I'm not arguing with you your taking my post the wrong way. By piped all the way back I meant that it is not cut off at the muffler or dumped at the axle but has piping traveling to the rear of the vehicle exiting at the stock location. I have a cat and would not remove it it sounds like crap with no cat and i don't want a catless exhaust. I can understand where we were both misunderstanding.
#382
::Regional Moderator::
Thread Starter
Join Date: Aug 2011
Location: Jacksonville, NC
Posts: 4,742
Likes: 0
Received 10 Likes
on
6 Posts
Year: 1993
Model: Cherokee
Engine: I6 4.0L HO
to run a turndown or not..im honesstly thinking about it.. good or bad? also withh this change the tone of the super 44
#383
Originally Posted by Nickell586
I've got them on mine thanks to po. I'm getting ready to cut it off and just run a straight pipe and muffler then dump it. I wouldn't put duals on it. Pointless on a straight 6. Just my opinion.
#384
Senior Member
Join Date: Mar 2011
Location: New Haven, IN
Posts: 956
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
Engine: 4.0L
Originally Posted by aJeepNamedGail
Alright thank you for the advice! I really appreciate it
#385
Originally Posted by Gee oh Dee
Removing catalytic converters is against Federal Regulations. Its also against forum rules to discuss doing this.
Discussing the removal or modification of a cat any further will result in the closing of this thread.
Please review the forum rules if you have any questions.
Thanks.
#387
Junior Member
Join Date: Aug 2011
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
So as far as exhaust sytems go what seems to be the most popular set up. High flow cat? What muffler? Also do you have to keep both 02 sensors in the system? I am looking for a little noise and power but not to loud.
#390
CF Veteran
Join Date: Nov 2010
Location: chillicothe, OH
Posts: 2,139
Likes: 0
Received 1 Like
on
1 Post
Year: 1991
Model: Cherokee
Engine: 4.0
So is the 40 loud enough? I dont want obnoxious. But want the noise there. I have a glass pack now and you can hear it but..... Just wanna hear it growl. At idle and when happily mashed. Should i go 10 series?