JK Rubicon wheels
#17
Member
Thread Starter
Join Date: Feb 2010
Location: Burtucky,Michigan
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Thats almost excactly like mine.Its gonna look sweat.Is it a safe assumption that thos mudterrains are capable off road?? Is that 4" or a 6" lift,CFarr?
Last edited by AutomaticKrackr; 06-28-2010 at 09:02 PM.
#18
#20
Love those wheels. I am going to grab an entire set with the stock tires if the thread is good. I thought it would be sick to apply the RUBICON decals on the fenders too -- but hey that's just me!
Here is a sexy setup:
Here is a sexy setup:
#21
Senior Member
Join Date: May 2010
Location: Michigan
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L I6
#24
Seasoned Member
#27
CF Veteran
Join Date: Sep 2010
Location: Spanaway
Posts: 1,562
Likes: 0
Received 2 Likes
on
2 Posts
Year: 97
Model: Cherokee (XJ)
Engine: 4.0
3.5" RE and 17" JK moabs/spidertrax adaptor/spacers. IIRC back spacing AFTER the 1.25" spacers is 4.25".
1st pic is my jeep w/trimmed fenders
2nd pic is my wife's jeep with the same lift and tires with no trimming. The tires rubbed on the edge of the bumper end caps (front and rear) but "clearanced" them after a while...
1st pic is my jeep w/trimmed fenders
2nd pic is my wife's jeep with the same lift and tires with no trimming. The tires rubbed on the edge of the bumper end caps (front and rear) but "clearanced" them after a while...
#30
Yes. WorleyBurd has 16" Moabs, which are scarce, and have the same bolt pattern as XJ. ALL JK "Moabs" are 5x5 17"
And I DO realize that it's an Old Thread. I'm just piecing together the necessary components to mount my [NEW] JK Moab Take-Offs ( KILLER Craigslist Score !). Got JK Rubicon Shocks [another KILLER Craigslist Score], JK Brake Lines [Free], 1.25" Adapters, Coil Springs [TBD], Leaf Springs [TBD].
My XJ is a 2WD TWO Door, and I am So Excited to Fix It Up ! Want JUST enough Lift to fit those JK Moab Take Offs .... I'm thinking 3"
And I DO realize that it's an Old Thread. I'm just piecing together the necessary components to mount my [NEW] JK Moab Take-Offs ( KILLER Craigslist Score !). Got JK Rubicon Shocks [another KILLER Craigslist Score], JK Brake Lines [Free], 1.25" Adapters, Coil Springs [TBD], Leaf Springs [TBD].
My XJ is a 2WD TWO Door, and I am So Excited to Fix It Up ! Want JUST enough Lift to fit those JK Moab Take Offs .... I'm thinking 3"