Let’s see your XJ seat swaps!
#16
Seasoned Member
Joined: Apr 2012
Posts: 402
Likes: 2
From: East Texas
Year: 98
Model: Cherokee
Engine: 4.0
Love those corbeau. Id actually like to raise my seats im 5'7 and Christine is 5'5 i dont think it would hurt either of us to have seats be a few inches taller.
Been eyeing ebay seats. Would fab brackets after setting seats on ocks to figure out heights
https://www.ebay.com/itm/372902891234
Love the brown seats
Been eyeing ebay seats. Would fab brackets after setting seats on ocks to figure out heights
https://www.ebay.com/itm/372902891234
Love the brown seats
what made them difficult to fab?
The following users liked this post:
EvanM (02-23-2021)
#17
CF Veteran
Joined: Aug 2018
Posts: 1,817
Likes: 316
From: Idaho
Year: 89
Model: Cherokee (XJ)
Engine: Peddles
[QUOTE=denverd1;3637667]been looking at those as well
Super easy to fab brackets out of blocks of hardwood . Hard wood is much stronger and safe than pine and fir.
Super easy to fab brackets out of blocks of hardwood . Hard wood is much stronger and safe than pine and fir.
#18
The seats I had were electric, but very broken so I couldn't reuse the bases, and I don't have a welder, or any fabrication skills. I talked to a local shop to fab me up something and it was cheaper to get the corbeau seats. if I had a welder, and time I probably could have worked something up, but in the end I went easy.
The following users liked this post:
EvanM (02-23-2021)
The following 2 users liked this post by CR97XJ:
ComancheCrewCab (02-24-2021),
ijeeep (02-28-2021)
#23
CF Veteran
Joined: Dec 2017
Posts: 1,425
Likes: 383
From: San Mateo, CA
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0 Renix, stock.
I put 2 door xj seats in my 4 door xj. got the tilt forward feature now, this makes it easy to reach stuff in the back from front door and gains me space for sleeping inside the back, I removed rear seat and replaced with a plywood platform. with the front seat tilted forward, I now have enough space to sleep in back. the rear seat delete also gives me more storage space, and since the platform is hinged in the stock seat back hinge points, and I can latch it closed, so heavy items are kept secure under the platform.
#24
I put 2 door xj seats in my 4 door xj. got the tilt forward feature now, this makes it easy to reach stuff in the back from front door and gains me space for sleeping inside the back, I removed rear seat and replaced with a plywood platform. with the front seat tilted forward, I now have enough space to sleep in back. the rear seat delete also gives me more storage space, and since the platform is hinged in the stock seat back hinge points, and I can latch it closed, so heavy items are kept secure under the platform.
I noticed that a TJ hinge with the little lever to lean the seat forward looked a real lot like a XJ one.
Found a cheap one on Ebay to play with and tried it out.
I just did it on the passenger side. Lets me lean the seat forward a little more in case I want to put something longer in the Jeep.
And am to lazy to strap it to the roof. LOL.
The following 2 users liked this post by Ralph77:
ijeeep (02-28-2021),
XJlimitedx99 (03-01-2021)
The following users liked this post:
JEFFSCHERK (05-22-2021)
#26
Senior Member
Joined: Oct 2019
Posts: 649
Likes: 175
From: Current XJ is
Year: 95
Model: Cherokee (XJ)
Engine: 4.0
I put 2 door xj seats in my 4 door xj. got the tilt forward feature now, this makes it easy to reach stuff in the back from front door and gains me space for sleeping inside the back, I removed rear seat and replaced with a plywood platform. with the front seat tilted forward, I now have enough space to sleep in back. the rear seat delete also gives me more storage space, and since the platform is hinged in the stock seat back hinge points, and I can latch it closed, so heavy items are kept secure under the platform.
#27
Senior Member
Joined: Oct 2019
Posts: 649
Likes: 175
From: Current XJ is
Year: 95
Model: Cherokee (XJ)
Engine: 4.0
I kinda did something like that.
I noticed that a TJ hinge with the little lever to lean the seat forward looked a real lot like a XJ one.
Found a cheap one on Ebay to play with and tried it out.
I just did it on the passenger side. Lets me lean the seat forward a little more in case I want to put something longer in the Jeep.
And am to lazy to strap it to the roof. LOL.
I noticed that a TJ hinge with the little lever to lean the seat forward looked a real lot like a XJ one.
Found a cheap one on Ebay to play with and tried it out.
I just did it on the passenger side. Lets me lean the seat forward a little more in case I want to put something longer in the Jeep.
And am to lazy to strap it to the roof. LOL.
The following 2 users liked this post by Veeb0rg:
ComancheCrewCab (03-10-2021),
XJlimitedx99 (03-11-2021)