This might be the end.
#1
Junior Member
Thread Starter
This might be the end.
Sadly, my Jeep might be done for. The frame rails have rusted to the point where the transmission crossover support has separated completely on the passenger side and partially on the driver side as well. I took it to a welding shop that agreed to take it on, found and bought a replacement crossmember in new condition, and a set of 3/16" thick Frame Stiffeners for the project (basically new, way thicker frame rails that are to be welded over the original unibody frame rails), and then AFTER I spent that money, the welder changed his mind and said he wouldn't work on it as he thinks it's too far gone. I want to find a second welding shop somewhere in the Chicago area to at least get a second opinion, but it's not looking good. Any suggestions out there? Mechanically, my Jeep is in very good condition. I HATE the thought of sending it to the boneyard.
Thread
Thread Starter
Forum
Replies
Last Post
SketchyGecko
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
04-18-2023 06:19 PM
WyoCherokee
Other Vehicles. Other Jeep models & cars and trucks of other makes
0
01-11-2016 11:33 AM
ski2221
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
12-04-2008 10:08 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)