Renix to HO TPS Adapter
#1
Thread Starter
Junior Member
Joined: Oct 2011
Posts: 51
Likes: 1
From: Sooke, BC
Year: 1988
Model: Cherokee
Engine: 4.0L
Renix to HO TPS Adapter
Well boys... Here it is...
For those who upgrade, and need to adapt the TB to the Renix sensor. I have done the hard work, and come up with an adapter for the HO TB to Renix TPS.
You need to source longer screws and spacers. The part below is 3D printed out of ABS, or you can CNC it, or cast it in Aluminum if you have those skills. ABS is fairly thermal stable up to about 150c so engine bay temps should be fine. Attached is a .Zip with the .STL and .OBJ files.
TB Side : Slot goes over the butterfly shaft where the HO TPS used to mount.
Renix Side : Hole goes over TPS arm Screw to keep everything aligned. Arm goes under TPS lever for actuation.
For those who upgrade, and need to adapt the TB to the Renix sensor. I have done the hard work, and come up with an adapter for the HO TB to Renix TPS.
You need to source longer screws and spacers. The part below is 3D printed out of ABS, or you can CNC it, or cast it in Aluminum if you have those skills. ABS is fairly thermal stable up to about 150c so engine bay temps should be fine. Attached is a .Zip with the .STL and .OBJ files.
TB Side : Slot goes over the butterfly shaft where the HO TPS used to mount.
Renix Side : Hole goes over TPS arm Screw to keep everything aligned. Arm goes under TPS lever for actuation.
Thread
Thread Starter
Forum
Replies
Last Post
RenegadeT
Modified XJ Cherokee Tech
4
05-07-2012 07:01 AM
XJ?2010
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
03-20-2010 05:13 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)