Super duty axle swap brake problems. All 4 calipers sticking
#1
Junior Member
Thread Starter
Super duty axle swap brake problems. All 4 calipers sticking
So I posted like a week ago, I recently did a 79 HPD44 front swap and a sterling 10.5 rear. All discs. I posted about my front calipers not releasing completely, and thought it was strictly the front. The calipers are not seized, but it seems like the pads are rubbing on the rotors on all 4 corners. Brakes have good pressure but aren’t fully releasing, I opened the bleeder valve and have read that if brake fluid squirts out it shows that there’s a decent amount of pressure in the brake system that made me think one of the front brake hoses could be collapsed but with them sticking on all 4 corners it makes me think otherwise. I’m probably going to bring the Cherokee to a local shop to see if he can look into it but I figured I’d post here first. I am lost lol
Thread
Thread Starter
Forum
Replies
Last Post
AunJeremiah
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
06-11-2019 05:32 PM
samhain
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
10-28-2017 08:26 PM
ZachsXJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
11-01-2009 08:55 PM
n00b
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
04-21-2009 09:24 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)