Post your lifted ZJ/WJ
#61
Newbie
Join Date: Mar 2012
Posts: 1
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Grand Cherokee
Engine: 5.9L V8
1998 ZJ 5.9L V8
Having a little fun in the driveway with my 5.9L. 4" RC lift, 31's on 17" rims, rock armor, K&N intake, and fully upgraded sound system with 2 12" rockford fosgate subs. Next to come 33" BF Goodrich AT's and front/rear bumpers.
The following users liked this post:
Carlos Manuel Davis (06-03-2020)
The following users liked this post:
Carlos Manuel Davis (06-03-2020)
The following users liked this post:
Carlos Manuel Davis (06-03-2020)
#64
Newbie
Join Date: Feb 2012
Location: Owosso
Posts: 13
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1993
Model: Grand Cherokee
Engine: 4.0 I6
From stock to fun
Here is my first posting of my ZJ before and after still alot of work to go but getting there. Just installed a 4 in rough country adjustable to 6. I also added 1in coil spring isolators and put on 32x11.50x15 tires on stock rims painted by me. I also added 1.5 in wheel spacers and did an HID headlight conversion. Next up body work and paint.
The following users liked this post:
Carlos Manuel Davis (06-03-2020)
The following users liked this post:
Carlos Manuel Davis (06-03-2020)
The following users liked this post:
Carlos Manuel Davis (06-03-2020)
The following users liked this post:
Carlos Manuel Davis (06-03-2020)
The following users liked this post:
Carlos Manuel Davis (06-03-2020)
The following users liked this post:
Carlos Manuel Davis (06-03-2020)
#70
Member
Join Date: Aug 2009
Location: Centinnial, CO
Posts: 137
Likes: 0
Received 2 Likes
on
1 Post
Year: 2004
Model: Grand Cherokee
Engine: 4.7L V8
04 WJ
Here is my 04 WJ. 2" Tera-Flex BB, 31" BFG AT's and 15" Crager Soft 8's, shocks are Rancho RS5000's
for the front shocks I used RS5239. These are for a XJ with 2-3" lift, WJ stock height and XJ stock height front shocks are the same as far as rancho is concerned (RS5128 which are good to a 2" lift) so for a longer front shock these are the ones you would want to get.
For the rear I used RS5194. The bottom mount fits correctly and is the same bushing/sleeve as the RS5260 (rancho stock height shocks good to a 2" lift for WJ's) The top however is a bit small in the width department, I got 1/2" Grade 8 washers at Home Depot to take up some space. word of advice crank down the upper mount really good...no thumping noise from the shock.
for the front shocks I used RS5239. These are for a XJ with 2-3" lift, WJ stock height and XJ stock height front shocks are the same as far as rancho is concerned (RS5128 which are good to a 2" lift) so for a longer front shock these are the ones you would want to get.
For the rear I used RS5194. The bottom mount fits correctly and is the same bushing/sleeve as the RS5260 (rancho stock height shocks good to a 2" lift for WJ's) The top however is a bit small in the width department, I got 1/2" Grade 8 washers at Home Depot to take up some space. word of advice crank down the upper mount really good...no thumping noise from the shock.
The following 2 users liked this post by lestatsghost:
CampCrawlinWJ (07-27-2020),
Carlos Manuel Davis (06-03-2020)
The following users liked this post:
Carlos Manuel Davis (06-03-2020)
The following users liked this post:
Carlos Manuel Davis (06-03-2020)
The following users liked this post:
Carlos Manuel Davis (06-03-2020)