Jeep Cherokee Forum
0 2019/03/09 14:24:53
0 2018/09/29 19:35:31
0 2018/09/29 19:33:30
0 2018/09/01 15:31:40
0 2018/09/01 15:31:39
Blasted and primed
Blasted and primed
0 2018/08/19 19:03:05
the pinch welder
the pinch welder
0 2018/08/19 19:03:05
wheel wells and rear 1/4s cut
wheel wells and rear 1/4s cut
0 2018/08/19 19:03:05
Pan removed
Pan removed
0 2018/08/19 19:03:05
Pan removed
Pan removed
0 2018/08/19 19:03:05
Wheel well re-welded
Wheel well re-welded
0 2018/08/19 19:03:05
Blasted and primed
Blasted and primed
0 2018/08/19 19:03:04
Rear frame rusted from aftermarket hitch install
Rear frame rusted from aftermarket hitch install
0 2018/08/19 19:03:04
And primed
And primed
0 2018/08/19 19:03:04
Blasted and primed
Blasted and primed
0 2018/08/19 19:03:03
Sand blasted and primed
Sand blasted and primed
0 2018/08/19 19:03:03
I did not like how the stock width 2x6 rocker was not even front to back, due to the taper of the XJ Body
I did not like how the stock width 2x6 rocker was not even front to back, due to the taper of the XJ Body
0 2018/05/23 15:37:35
The 2x6 resting on the angle.
The 2x6 resting on the angle.
0 2018/05/23 15:34:54
Nice even reveal
Nice even reveal
0 2018/05/23 15:34:53
Trial fit
Trial fit
0 2018/05/23 15:34:52
Rockers all welded up and painted
Rockers all welded up and painted
0 2018/05/23 15:34:50
Soo, we ripped the 2x6 down on a taper, then welded a cap back on (2" band iron)
Soo, we ripped the 2x6 down on a taper, then welded a cap back on (2" band iron)
0 2018/05/23 15:34:50
seams sealed with auto body seam sealer
seams sealed with auto body seam sealer
0 2018/05/23 15:30:34
inner rockers primed with Zinc-Chromate primer
inner rockers primed with Zinc-Chromate primer
0 2018/05/23 15:30:33
sand blasting
sand blasting
0 2018/05/23 15:30:31
Sand blasting
Sand blasting
0 2018/05/23 15:30:30
all gaps sealed with auto body seam sealer
all gaps sealed with auto body seam sealer
0 2018/05/23 15:26:43
inner rocker primed with Zink-Chromate oil primer
inner rocker primed with Zink-Chromate oil primer
0 2018/05/23 15:26:42
Sand blasting
Sand blasting
0 2018/05/23 15:26:41
Sand blasting inner rocker before priming
Sand blasting inner rocker before priming
0 2018/05/23 15:26:40
inner rocker cut down
inner rocker cut down
0 2018/05/23 15:20:47
cutting down new inner rocker
cutting down new inner rocker
0 2018/05/23 15:20:46
Trial fitting new inner rocker panel
Trial fitting new inner rocker panel
0 2018/05/23 15:20:45
welding in new inner rocker
welding in new inner rocker
0 2018/05/23 15:20:44
welding angle to inner rocker panel
welding angle to inner rocker panel
0 2018/05/23 15:20:42
new inner rocker cut
new inner rocker cut
0 2018/05/23 15:15:41
Cutting down new inner rockers
Cutting down new inner rockers
0 2018/05/23 15:15:40
Trial fitting new inner rockers
Trial fitting new inner rockers
0 2018/05/23 15:15:39
Angle to hold 2x6 welded onto new inner rocker
Angle to hold 2x6 welded onto new inner rocker
0 2018/05/23 15:15:37
0 2018/05/23 15:12:13