2 door build thread
#1
Newbie
Thread Starter
Join Date: Mar 2016
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0L straight 6
2 door build thread
So I purchased a Cherokee a few months back and since things are kinda slow moving right now I figured I'd catch up and make a build thread. I'm new to the wheeling and off-roading world as well as jeeps so any advise, info, or anything to help move me in the right direction would be greatly appreciated. I'll attach pictures as I go but I started out with a 94 2 door xj I bought for 700 bucks off craigslist in running and driving condition. I knew the floors were rusted pretty bad so I removed all the carpet and seats. I also was told the oil pan gasket needed replacing so I got on that and boy was that a pain in the you know what. So far I haven't really put anything aftermarket on it yet but I did pick up a set of steel wheels that needed some cleaning up so I decided to completely refinish them and bedline them. I want to keep this thread rolling so I will update as often as I can and again please any and all help would be greatly appreciated
#2
Newbie
Thread Starter
Join Date: Mar 2016
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0L straight 6
The day I got her in my drive way the paint job looks like spray paint so I'm planning on raptor lining the whole thing after I get a new rear hatch and fix the driver side door
Replaced rear diff seal and found out i have a Chrysler 8.25 and since it is a 94 I'm thinking it's the 27 spline version but I don't know how to tell the difference
LAfter the seats got removed and before the nasty carpet got trashed
LYay rusty floors just what everyone loves to see
Passenger side is much much worse
#4
Newbie
Thread Starter
Join Date: Mar 2016
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0L straight 6
Picked a set of 15x10 steel wheels off craigslist for a good price need some work to get them lookin good again
Sticks out 3 and 1/4 inches from the fender flare but I'm planning on taking the flares off and trimming the fenders
Primer on the backside of the first wheel I did the auto primer worked really well
Wheel face primed after priming I really saw the spots I missed with the wire wheel so I got that back out hit the spots I missed and re painted
The finished product I'm very happy with the results picked up some stock bumpers to slap on too that will be Bedlined as well
Thread
Thread Starter
Forum
Replies
Last Post
bigredjeepbeautiful
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
31
10-14-2017 09:33 PM
gregxgriffin
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
20
03-25-2016 12:11 AM
cbears85
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
7
03-20-2016 03:05 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)