What did you do to your Cherokee today?
CF Veteran
Some ******* kid threw a small rock off a foot bridge that overpasses the highway where I live. Took a nasty chunk out of my windshield. My windshield has always bothered me. I can never seem to get it clean. Always glare and smudges no matter what I use to clean it. Hopefully the insurance comes through.
I'd like to replace the windshield trim while the glass is out. Where is a good place to get it? You think insurance would cover that if it's dry rotting?
I'd like to replace the windshield trim while the glass is out. Where is a good place to get it? You think insurance would cover that if it's dry rotting?
CF Veteran
CF Veteran
Join Date: Jan 2013
Location: west chester, pa
Posts: 19,216
Likes: 0
Received 40 Likes
on
36 Posts
Year: 1999
Engine: 4.0
Senior Member
Join Date: Nov 2008
Location: south bend indiana
Posts: 959
Likes: 0
Received 7 Likes
on
6 Posts
Year: 1993
Model: Cherokee(XJ)
Engine: 4.0 i six H.O.
remounted my rear window washer pump, while trying to mount my license plate. the nut was out of the grommet for the pump, so I took out the plate light to get my fingers or something in there, and I had to use long curved needle nose pliers to hold the nut on top of the bolt and turn the bolt at the same time. it threaded on and i kept turning until the nut went down back into the grommet. and now its tight. License plate clips were shot on top, none on bottom, so drilled out the top ones and reamed out the bottom ones a little and put new clips in. done!!! finally got the plate on.
Got the drivelines done. Haven't done U-joints in a while. Not rocket surgery, but still a PITA... Ruined one out of five joints, so not a bad record... Lol! I'll install them tomorrow.
::CF Moderator::
As Clown said, Local member had it for sale. I've heard if you call and talk to him he is willing to make them. I don't know how true that is though.
Senior Member
First prototype for a 3 switch panel for the early xj/mj. Takes 97+ xj/tj switches. That particular panel is a replacement for the stock driver side panel. Printed on my entry level 3d printer.
I also got the first production test of a 4 switch panel that replaces the clock panel. This one was printed on a Stratasys SLS printer that costs more than my house.
Now I need to track down someone locally with an early xj or mj that's willing to let me rip apart their dash
Member
Join Date: Feb 2016
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Engine: I6
Ordered coil spring insulators and coil spring retaining brackets. My 95 XJ were missing these parts, and I didn't know they existed, until I saw a YouTube video on installing springs and lifts.