Zombie Response Jeep (Slow)
#31
Junior Member
Thread Starter
Join Date: Mar 2016
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0L
Well guys after I had my fun in the jeep I had to fix it { Normal Jeep Problems}. But had power just blew out the bearings so it was loud, got a new factory replacement one on summent racing for less than $100. But for anyone to know if they had the same problems. I was getting 14v when I started the jeep up, but after 20 - 30 sec would drop to nothing. That was my problem, hope it helps anyone else out!
New Power house
New Power house
#32
Junior Member
Thread Starter
Join Date: Mar 2016
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0L
Frount End
Ok well some of the new parts came in from summit racing. Next day shipping for free! But going to install them this weekend...
#35
Junior Member
Love the fact you are just handling this and not saying "Whats the best part at the best price for this?"
Lots of cool custom stuff.
On that note...how'd how mount the roof rack? any close up pics of the tie in to the roof? The rack I want to put on is easy enough to fab up but Im back and forth on mounting it. (can't see u bolts keeping it nice and snug).
Love the CB on the roof. Gotta do that too. GF gets way too angry with her leg room getting all compromised for more important stuff. Ladies cross their legs anyways I thought? hahha. Oops.
Lots of cool custom stuff.
On that note...how'd how mount the roof rack? any close up pics of the tie in to the roof? The rack I want to put on is easy enough to fab up but Im back and forth on mounting it. (can't see u bolts keeping it nice and snug).
Love the CB on the roof. Gotta do that too. GF gets way too angry with her leg room getting all compromised for more important stuff. Ladies cross their legs anyways I thought? hahha. Oops.
#36
Junior Member
Thread Starter
Join Date: Mar 2016
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0L
#37
Junior Member
Thread Starter
Join Date: Mar 2016
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0L
Love the fact you are just handling this and not saying "Whats the best part at the best price for this?"
Lots of cool custom stuff.
On that note...how'd how mount the roof rack? any close up pics of the tie in to the roof? The rack I want to put on is easy enough to fab up but Im back and forth on mounting it. (can't see u bolts keeping it nice and snug).
Love the CB on the roof. Gotta do that too. GF gets way too angry with her leg room getting all compromised for more important stuff. Ladies cross their legs anyways I thought? hahha. Oops.
Lots of cool custom stuff.
On that note...how'd how mount the roof rack? any close up pics of the tie in to the roof? The rack I want to put on is easy enough to fab up but Im back and forth on mounting it. (can't see u bolts keeping it nice and snug).
Love the CB on the roof. Gotta do that too. GF gets way too angry with her leg room getting all compromised for more important stuff. Ladies cross their legs anyways I thought? hahha. Oops.
#38
Junior Member
Thread Starter
Join Date: Mar 2016
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0L
Extra running Lights
Extra running Lights. 2(18w) pods by auxbeam
Well about a week about I installed son extra running lights for the jeep. That way when I do start driving her again to work I will be able to see. Video soon on my "Redneck" wiring up with the relay off the running lights for the switch.
Well about a week about I installed son extra running lights for the jeep. That way when I do start driving her again to work I will be able to see. Video soon on my "Redneck" wiring up with the relay off the running lights for the switch.
#39
Junior Member
Thread Starter
Join Date: Mar 2016
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0L
Well here is a little wire up video for the jeeps running lights, I know that it is not the cleanest build I have done for wiring but it works. And yes in the state of Michigan where I live these are legal to run.
#40
Junior Member
Thread Starter
Join Date: Mar 2016
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0L
Well,
I did the ball joints and wheel bearing, a cupple of weeks ago and just now got the video done. It is a bit redneck and not so much the proper way but we got the job done.
I did the ball joints and wheel bearing, a cupple of weeks ago and just now got the video done. It is a bit redneck and not so much the proper way but we got the job done.
#41
Senior Member
Join Date: Apr 2016
Location: Maple Heights, Ohio
Posts: 536
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0
Well,
I did the ball joints and wheel bearing, a cupple of weeks ago and just now got the video done. It is a bit redneck and not so much the proper way but we got the job done.
https://www.youtube.com/watch?v=bSWBd3EFR5k
I did the ball joints and wheel bearing, a cupple of weeks ago and just now got the video done. It is a bit redneck and not so much the proper way but we got the job done.
https://www.youtube.com/watch?v=bSWBd3EFR5k
I commented on your video on YouTube, but I'll throw it up here, too. I'm doing my ball joints in a few weeks, and I'll definitely use a puller.
#42
Junior Member
Thread Starter
Join Date: Mar 2016
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0L
Yes and thanks for the comment, I did look in to your build and it is coming out good.
#43
Junior Member
Thread Starter
Join Date: Mar 2016
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0L
Well been a good amount of time since I last posted. But we got a first kind of sponsorship for our YouTube Chanel and for the JEEP! So we decided to go with a new light bar for the front of the jeep. Since the old AuxBeam LED Light bar was starting to die ( Well the Paint was chipping). So the new "oEdRo" (ed-row) light is down fantastic! Also for a funny video we did a destruction and test of a $50 LED Light bar, used it as a ramp, and a tow strap!
#44
Junior Member
Thread Starter
Join Date: Mar 2016
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0L
Well everyone we painted the jeep and it turned out great. For Under $100 still curing and Harding over the next 14 days then will be rock hard. But for the paint coming from tractor supply I dont think it is to bad, Let me know what you think?
I do still have to re-paint the roof rack and re install it and all of the offroad lights to. But more to come.
Before Paint
Before Paint
Before Paint
After New Paint
After New Paint
After New Paint
After New Paint
I do still have to re-paint the roof rack and re install it and all of the offroad lights to. But more to come.
Before Paint
Before Paint
Before Paint
After New Paint
After New Paint
After New Paint
After New Paint